[Cartoweb-users] Re: Cartoweb-users Digest, Vol 12, Issue 31

Fri Apr 21 09:31:45 EDT 2006

Hi
The true is insufficient information for installing Cartoweb on Debian
sarge?

I read the tutorial . 1st part is easy (just apt-get) but second part is not
clear.

The configuration of apache on debian is the doubt (cgi-bin, for example)

Well, Please help me about this

Carlos Francisco Miranda - Director/Editor
GEOALGOR - Portal Internacional de Geomatica
----- Original Message ----- 
From: <cartoweb-users-request at lists.maptools.org>
To: <cartoweb-users at lists.maptools.org>
Sent: Friday, April 21, 2006 6:07 AM
Subject: Cartoweb-users Digest, Vol 12, Issue 31

> Send Cartoweb-users mailing list submissions to
> cartoweb-users at lists.maptools.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.maptools.org/mailman/listinfo/cartoweb-users
> or, via email, send a message with subject or body 'help' to
> cartoweb-users-request at lists.maptools.org
>
> You can reach the person managing the list at
> cartoweb-users-owner at lists.maptools.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Cartoweb-users digest..."
>
>
> Today's Topics:
>
>    1. How to create a new project (Pierre GIRAUD)
>    2. Re: Re: Cartoweb-users Digest, Vol 12, Issue 27 (Pierre GIRAUD)
>    3. Re: failure - cannot find (Marie Silvestre)
>    4. Re: failure - cannot find (Pierre GIRAUD)
>    5. Re: failure - cannot find (oliver)
>    6. query data in cartoweb  (rim chammem)
>    7. docs (jouini manel)
>    8. Re: query data in cartoweb (Pierre GIRAUD)
>    9. Re: query data in cartoweb (Jacolin Yves)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 21 Apr 2006 10:09:39 +0200
> From: Pierre GIRAUD <pierre.giraud at camptocamp.com>
> Subject: [Cartoweb-users] How to create a new project
> To: Cartoweb-users at lists.maptools.org
> Message-ID: <44489343.4020901 at camptocamp.com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Dear users,
>
> As seen on this list last weeks, some of you encountered difficulties to
> build new projects with Cartoweb3.
> To remedy to this, we decided to (re)write down a typical procedure that
> will surely help most users to start with Cartoweb3.
> It describes how to create a new project arborescence, setup the new
> project and most important, how to insert new data.
> You can find it in the wiki
> (http://cartoweb.org/cwiki/HowToCreateANewProject).
>
> Please note that this HowTo has been tested and works on Cartoweb 3.2
> and current CVS version.
>
> Hope this helps.
>
> Regards
>
> -- 
> _________________________________________________________
> Pierre GIRAUD
> Géomaticien, Analyste
>
> Camptocamp France SAS
> Savoie Technolac, BP 352
> 73377 Le Bourget du Lac, Cedex
>
> Tel : 00 33 4 79 44 44 93
> Mail : pierre.giraud at camptocamp.com
> http://www.camptocamp.com
>
>
>
>
> ------------------------------
>
> Message: 2
> Date: Fri, 21 Apr 2006 10:16:47 +0200
> From: Pierre GIRAUD <pierre.giraud at camptocamp.com>
> Subject: Re: [Cartoweb-users] Re: Cartoweb-users Digest, Vol 12, Issue
> 27
> To: Baroudi Malek <baroudi.malek at gmail.com>
> Cc: cartoweb-users at lists.maptools.org
> Message-ID: <444894EF.3090901 at camptocamp.com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> If you followed the documentation proposed by Oliver
> (http://cartoweb.org/doc/cw3.2/xhtml/appendix.debian_mapserver.html), I
> advice you to install the php5-cli package to get the php interpreter
> available in your shell.
>
> Regards
>
> Pierre
>
>
>
> Baroudi Malek wrote:
>
> >Thank you for answer,
> >Did you now the location of php interpreter in Debian sarge ?
> >I don't have /php file in /usr/lib/cgi-bin !
> >So I'm in bloc to install cartweb .
> >Sorry for my bad English
> >
> >_______________________________________________
> >Cartoweb-users mailing list
> >Cartoweb-users at lists.maptools.org
> >http://lists.maptools.org/mailman/listinfo/cartoweb-users
> >
> >
>
>
> -- 
> _________________________________________________________
> Pierre GIRAUD
> Géomaticien, Analyste
>
> Camptocamp France SAS
> Savoie Technolac, BP 352
> 73377 Le Bourget du Lac, Cedex
>
> Tel : 00 33 4 79 44 44 93
> Mail : pierre.giraud at camptocamp.com
> http://www.camptocamp.com
>
>
>
>
> ------------------------------
>
> Message: 3
> Date: Fri, 21 Apr 2006 10:27:50 +0200
> From: Marie Silvestre <msilvestre at bretagne-environnement.org>
> Subject: Re: [Cartoweb-users] failure - cannot find
> To: oliver <oliver.christen at camptocamp.com>
> Cc: cartoweb-users at lists.maptools.org,
> marie.silvestre at bretagne-environnement.org
> Message-ID: <44489786.8080307 at bretagne-environnement.org>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Well... I saw "child layer" and "AllMaine", "Urban", "Wetlands" do are
> layers so I though... ok, never mind...
> Let's have some tee and holidays !
>
> Marie Silvestre
> Bretagne environnement
> http://cartographie.bretagne-environnement.org
>
>
>
> oliver a écrit :
> > boundarylines is defined as a LayerGroup, not a layer. It should not
> > be in the mapfile, only its children.
> >
> >
> >> Hi everyone !
> >> I may be wrong but it seems the layer "boundarylines" is missing from
> >> your map file... I guess it's part of the problem and hope it helps !
> >>
> >> Marie Silvestre
> >> Bretagne environnement
> >> http://cartographie.bretagne-environnement.org
> >>
> >>
> >>
> >> Yves Jacolin a écrit :
> >>> Sorry, I don't have more any idea :-( Wait for an answer tomorrow
> >>> from a camptocamp developers.
> >>> Your layers.ini and map files seems correct. Try makemaps script but
> >>> I don't think it will be useful for this (actually it is used for
> >>> switching map).
> >>>
> >>> Moreover, I said soemthing wrong in my last mail, autoLegend is not
> >>> useful for layer group, just to make legend, as its name tells !
> >>>
> >>> I can check tomorrow with my own mapfile and layers.ini file.
> >>>
> >>> Y.
> >>> Le Jeudi 20 Avril 2006 19:00, vous avez écrit :
> >>>
> >>>> I tried using the updated layers.ini file you sent.  I still get
> >>>> the exact
> >>>> same error:
> >>>>
> >>>> Class : CartoclientException
> >>>> Message : Child layer boundarylines not found
> >>>> Backtrace:
> >>>>
> >>>> file: 474 -
> >>>>
/home/cgdweb/site/cgddemo/cartoweb3/coreplugins/layers/client/ClientLayers.
> >>>>
> >>>> php call: LayerNode->setChildren(Array(31), Null)
> >>>>
> >>>> file: 492 -
> >>>>
/home/cgdweb/site/cgddemo/cartoweb3/coreplugins/layers/client/ClientLayers.
> >>>>
> >>>> php call: ClientLayers->getLayerNode()
> >>>>
> >>>> file: 512 -
> >>>>
/home/cgdweb/site/cgddemo/cartoweb3/coreplugins/layers/client/ClientLayers.
> >>>>
> >>>> php call: ClientLayers->getLayersSecurityFiltered()
> >>>>
> >>>> file: 525 -
> >>>>
/home/cgdweb/site/cgddemo/cartoweb3/coreplugins/layers/client/ClientLayers.
> >>>>
> >>>> php call: ClientLayers->getLayers()
> >>>>
> >>>> file: 762 -
> >>>>
/home/cgdweb/site/cgddemo/cartoweb3/coreplugins/layers/client/ClientLayers.
> >>>>
> >>>> php call: ClientLayers->getLayerByName("root")
> >>>>
> >>>> file: 420 -
> >>>>
/home/cgdweb/site/cgddemo/cartoweb3/coreplugins/layers/client/ClientLayers.
> >>>>
> >>>> php call: ClientLayers->fetchHiddenSelectedLayers("root")
> >>>>
> >>>> file: UNKNOWN - UNKNOWN
> >>>> call: ClientLayers->createSession(Object(MapInfo),
> >>>> Object(InitialMapState))
> >>>>
> >>>> file: 270 -
> >>>> /home/cgdweb/site/cgddemo/cartoweb3/common/PluginManager.php
> >>>> call: call_user_func_array(Array(2), Array(2))
> >>>>
> >>>> file: 285 -
> >>>> /home/cgdweb/site/cgddemo/cartoweb3/common/PluginManager.php
> >>>> call: PluginManager->callPluginImplementing(Object(ClientLayers),
> >>>> "Sessionable", "createSession", Array(2))
> >>>>
> >>>> file: 574 -
/home/cgdweb/site/cgddemo/cartoweb3/client/Cartoclient.php
> >>>> call: PluginManager->callPluginsImplementing("Sessionable",
> >>>> "createSession", Array(2))
> >>>>
> >>>> file: 688 -
/home/cgdweb/site/cgddemo/cartoweb3/client/Cartoclient.php
> >>>> call: Cartoclient->callPluginsImplementing("Sessionable",
> >>>> "createSession",
> >>>> Object(MapInfo), Object(InitialMapState))
> >>>>
> >>>> file: 382 -
/home/cgdweb/site/cgddemo/cartoweb3/client/Cartoclient.php
> >>>> call: Cartoclient->initializeSession()
> >>>>
> >>>> file: 36 - /home/cgdweb/site/cgddemo/cartoweb3/htdocs/client.php
> >>>> call: Cartoclient->__construct()
> >>>>
> >>>> file: 3 - /home/cgdweb/site/cgddemo/cartoweb3/htdocs/cgd_mapfile.php
> >>>> call:
> >>>> require_once("/home/cgdweb/site/cgddemo/cartoweb3/htdocs/client.php")
> >>>>
> >>>> Any further ideas?
> >>>>
> >>>> Kenton W.
> >>>>
> >>>
> >>>
> >>
> >>
> >> _______________________________________________
> >> Cartoweb-users mailing list
> >> Cartoweb-users at lists.maptools.org
> >> http://lists.maptools.org/mailman/listinfo/cartoweb-users
> >>
> >
> > _______________________________________________
> > Cartoweb-users mailing list
> > Cartoweb-users at lists.maptools.org
> > http://lists.maptools.org/mailman/listinfo/cartoweb-users
> >
> >
> >
>
>
>
>
> ------------------------------
>
> Message: 4
> Date: Fri, 21 Apr 2006 10:32:29 +0200
> From: Pierre GIRAUD <pierre.giraud at camptocamp.com>
> Subject: Re: [Cartoweb-users] failure - cannot find
> Cc: cartoweb-users at lists.maptools.org
> Message-ID: <4448989D.2090800 at camptocamp.com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> You also have to pay attention to the caching system. You probably have
> a correctly written layers.ini file, but maybe the error continues to be
> shown due to cache.
>
> What is your defined profile ? (development, production)
> Did you try to launch the following command ?
>   cw3setup.php --clean
>
> Regards
>
> Pierre
>
> oliver wrote:
>
> > Hi Kenton
> >
> > What happens if you try to display the TownLines and Counties layers
> > separatly
> > (layers.root.children = AllMaine, Urban, Wetlands, TownLines,
> > Counties, water, roads) ?
> >
> > your config file seems ok but it could be a problem with the
> > boundarylines children elements.
> > also you could try to change the name of the layergroup boundarylines,
> > maybe some weird conflict with a reserved keyword occure (I would be
> > surprised but one never know).
> >
> > Regards
> > Oliver
>
>
>
>
> ------------------------------
>
> Message: 5
> Date: Fri, 21 Apr 2006 10:44:38 +0200
> From: "oliver" <oliver.christen at camptocamp.com>
> Subject: Re: [Cartoweb-users] failure - cannot find
> To: "Kenton Williams" <Kenton_Williams at umit.maine.edu>,
> <cartoweb-users at lists.maptools.org>
> Message-ID: <019801c6651f$d5a24190$1500a8c0 at maunakea>
> Content-Type: text/plain; format=flowed; charset="iso-8859-1";
> reply-type=response
>
> Ah well, i should pay better attention. I missed your comments at the end
of
> your previous message.
>
> Concerning boundarylines error still showing up even after removing it,
are
> you running with profile = production ?
> If so the caching system may be kicking. So either set profile =
development
> or launch a cw3setup --clean after each modification.
>
> Regards
> Oliver
>
>
>
> > Hi Kenton
> >
> > What happens if you try to display the TownLines and Counties layers
> > separatly
> > (layers.root.children = AllMaine, Urban, Wetlands, TownLines, Counties,
> > water, roads) ?
> >
> > your config file seems ok but it could be a problem with the
boundarylines
> > children elements.
> > also you could try to change the name of the layergroup boundarylines,
> > maybe some weird conflict with a reserved keyword occure (I would be
> > surprised but one never know).
> >
> > Regards
> > Oliver
> >
> >
> >
> >> Hello,
> >>
> >> I modified my layers.ini file so that it is now:
> >>
> >> layers.root.className = LayerGroup
> >> layers.root.children = AllMaine, Urban, Wetlands, boundarylines, water,
> >> roads
> >> layers.root.rendering = tree
> >>
> >> layers.AllMaine.className = Layer
> >> layers.AllMaine.label = All of Maine
> >>
> >> layers.Urban.className = Layer
> >> layers.Urban.label = Urban Areas
> >>
> >> layers.Wetlands.className = Layer
> >> layers.Wetlands.label = Wetlands
> >>
> >> layers.boundarylines.className = LayerGroup
> >> layers.boundarylines.label = Boundary Lines
> >> layers.boundarylines.children = TownLines, Counties
> >> layers.boundarylines.rendering = tree
> >>
> >> layers.TownLines.className = Layer
> >> layers.TownLines.label = Town Lines
> >>
> >> layers.Counties.className = Layer
> >> layers.Counties.label = Counties
> >>
> >> layers.water.className = LayerGroup
> >> layers.water.label = Water Bodies
> >> layers.water.children = BigWater, MedScaleWater, SmScaleWater
> >> layers.water.aggregate = true
> >>
> >> layers.BigWater.className = Layer
> >> layers.BigWater.label = Large Waterbodies
> >>
> >> layers.MedScaleWater.className = Layer
> >> layers.MedScaleWater.label = Medium Detail Waterbodies
> >>
> >> layers.SmScaleWater.className = Layer
> >> layers.SmScaleWater.label = High Detail Waterbodies
> >>
> >> layers.roads.className = LayerGroup
> >> layers.roads.label = Roads
> >> layers.roads.rendering = tree
> >> layers.roads.children = LocalRds, SecRds, SpecRds, Interstate
> >>
> >> layers.LocalRds.className = Layer
> >> layers.LocalRds.label = Local Roads
> >>
> >> layers.SecRds.className = Layer
> >> layers.SecRds.label = Secondary Roads
> >>
> >> layers.SpecRds.className = Layer
> >> layers.SpecRds.label = Special Roads
> >>
> >> layers.Interstate.className = Layer
> >> layers.Interstate.label = Interstate
> >>
> >> All of the layers are present in my mapfile, even the same case (ex:
> >> TownLines rather than townlines).  I get the exact same error message.
I
> >> tried deleting the boundarylines layerGroup entirely to have the layers
> >> shown independently in the layer
> >> tree.  In spite of the fact that there is absolutely no mention of
> >> boundarylines child layer in the layers.ini file, I STILL get the error
> >> that the child layer boundarylines cannot be found.  Do you have to
> >> re-run the cw3setup.php every time after
> >> making changes to the layers.ini file?
> >>
> >> I have attached both my mapfile and my layers.ini file for reference.
> >>
> >> Thanks very much for your assistance!
> >>
> >> Kenton W.
> >>
> >>
> >
> >
>
> --------------------------------------------------------------------------
------
> >
> >
> >> _______________________________________________
> >> Cartoweb-users mailing list
> >> Cartoweb-users at lists.maptools.org
> >> http://lists.maptools.org/mailman/listinfo/cartoweb-users
> >>
> >
> > _______________________________________________
> > Cartoweb-users mailing list
> > Cartoweb-users at lists.maptools.org
> > http://lists.maptools.org/mailman/listinfo/cartoweb-users
> >
>
>
>
> ------------------------------
>
> Message: 6
> Date: Fri, 21 Apr 2006 11:53:37 +0200 (CEST)
> From: rim chammem <bellarima_2006 at yahoo.fr>
> Subject: [Cartoweb-users] query data in cartoweb
> To: cartoweb-users at lists.maptools.org
> Message-ID: <20060421095337.4225.qmail at web26315.mail.ukl.yahoo.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> hi alls,
>
> I ask if someone Know how can i query data in cartoweb and what i must add
to the mapfile.
> If someone can help me, i will be so gratefull .
>   Thanks for your time.
>
>
>
>
> ---------------------------------
>  Faites de Yahoo! votre page d'accueil sur le web pour retrouver
directement vos services préférés : vérifiez vos nouveaux mails, lancez vos
recherches et suivez l'actualité en temps réel. Cliquez ici.
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
http://lists.maptools.org/pipermail/cartoweb-users/attachments/20060421/509ba12d/attachment-0001.html
>
> ------------------------------
>
> Message: 7
> Date: Fri, 21 Apr 2006 12:01:04 +0200 (CEST)
> From: jouini manel <manouinfo at yahoo.fr>
> Subject: [Cartoweb-users] docs
> To: cartoweb-users at lists.maptools.org
> Message-ID: <20060421100104.88194.qmail at web27010.mail.ukl.yahoo.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> i have started using cartoweb for a short period now I am trying to query
data in cartoweb and to connect to a postgrsql data base: the exact
procedure
>   If someone has any idea about the subject or can help me I will be so
gratefull
>
>
> ---------------------------------
>  Faites de Yahoo! votre page d'accueil sur le web pour retrouver
directement vos services préférés : vérifiez vos nouveaux mails, lancez vos
recherches et suivez l'actualité en temps réel. Cliquez ici.
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
http://lists.maptools.org/pipermail/cartoweb-users/attachments/20060421/ec1c2d47/attachment-0001.html
>
> ------------------------------
>
> Message: 8
> Date: Fri, 21 Apr 2006 12:08:39 +0200
> From: Pierre GIRAUD <pierre.giraud at camptocamp.com>
> Subject: Re: [Cartoweb-users] query data in cartoweb
> To: rim chammem <bellarima_2006 at yahoo.fr>
> Cc: cartoweb-users at lists.maptools.org
> Message-ID: <4448AF27.6080107 at camptocamp.com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> To query data with cartoweb you must declare the chosen layers queriable.
> To do that you must add a "TEMPLATE" parameter in your LAYER or CLASS
> definition.
> This should work.
>
> http://cartoweb.org/doc/cw3.2/xhtml/user.query.html (see Related
> Elements in Mapfile)
>
> Regards
>
> Pierre
>
>
> rim chammem wrote:
>
> > hi alls,
> >
> > I ask if someone Know how can i query data in cartoweb and what i must
> > add to the mapfile.
> > If someone can help me, i will be so gratefull .
> > Thanks for your time.
> >
> >
> > ------------------------------------------------------------------------
> > *Faites de Yahoo! votre page d'accueil sur le web* pour retrouver
> > directement vos services préférés : vérifiez vos nouveaux mails,
> > lancez vos recherches et suivez l'actualité en temps réel. Cliquez ici
> >
<http://us.rd.yahoo.com/mail/mail_taglines/yahoofr/*http://fr.yahoo.com/set>
.
> >
> >
> >------------------------------------------------------------------------
> >
> >_______________________________________________
> >Cartoweb-users mailing list
> >Cartoweb-users at lists.maptools.org
> >http://lists.maptools.org/mailman/listinfo/cartoweb-users
> >
> >
>
>
>
>
>
> ------------------------------
>
> Message: 9
> Date: Fri, 21 Apr 2006 12:06:58 +0200
> From: Jacolin Yves <yjacolin at free.fr>
> Subject: Re: [Cartoweb-users] query data in cartoweb
> To: cartoweb-users at lists.maptools.org
> Message-ID: <200604211206.58898.yjacolin at free.fr>
> Content-Type: text/plain;  charset="iso-8859-1"
>
> You need to use query plugin, see documentation :
> http://www.cartoweb.org/doc/cw3.2/xhtml/user.query.html
>
> You need layer in you mapfile and set query.ini in client_conf and
> server_conf.youproject/ directory
>
> query.ini in server_conf/yourproject :
> drawQueryUsingHilight = false
> noRowId = true
>
> query.ini in client_conf/
> persistentQueries = false
> displayExtendedSelection = true
> ; no layer means all layers :
> queryLayers =
> returnAttributActive = true
> defaultPolicy = POLICY_INTERSECTION
> defaultMaskmode = true
> defaultHilight = true
> defaultAttributes = true
> defaultTable = true
>
> Y.
> Le Vendredi 21 Avril 2006 11:53, rim chammem a écrit :
> > hi alls,
> >
> > I ask if someone Know how can i query data in cartoweb and what i must
add
> > to the mapfile. If someone can help me, i will be so gratefull .
> >   Thanks for your time.
> >
> >
> >
> >
> > ---------------------------------
> >  Faites de Yahoo! votre page d'accueil sur le web pour retrouver
> > directement vos services préférés : vérifiez vos nouveaux mails, lancez
vos
> > recherches et suivez l'actualité en temps réel. Cliquez ici.
>
> -- 
> Yves Jacolin
> http://yjacolin.gloobe.org
> ----
> Stagaire Conservatoire Régional des Espaces Naturels de la région Centre
> http://cahiersnaturalistes.free.fr/cpnrc/
> ----
> - Qu'est-ce que cela peut faire que je lutte pour la mauvaise cause
> puisque je suis de bonne foi?
> - Et qu'est-ce que ça peut faire que je sois de mauvaise foi
> puisque c'est pour la bonne cause. (Jacques
> Prévert)
>
>
>
> ------------------------------
>
> _______________________________________________
> Cartoweb-users mailing list
> Cartoweb-users at lists.maptools.org
> http://lists.maptools.org/mailman/listinfo/cartoweb-users
>
>
> End of Cartoweb-users Digest, Vol 12, Issue 31
> **********************************************
>
>