[Chameleon] Rounding scale value

[Eijnden, B. van den (Bart)]

Hi Dejan,

I looked into the same problem a few months ago, but the problem with
rounding seems that all the calculations with the scale will also lose
precision, so you need to decouple display from the raw values somehow.

If you find a solution, please update the following bug:

http://bugzilla.maptools.org/show_bug.cgi?id=1031

Best regards,
Bart

-----Oorspronkelijk bericht-----
Van: chameleon-bounces at lists.maptools.org
[mailto:chameleon-bounces at lists.maptools.org]Namens Gambin Dejan
Verzonden: dinsdag 28 maart 2006 10:36
Aan: chameleon at lists.maptools.org
Onderwerp: [Chameleon] Rounding scale value


Hi,

I am using Scale widget to display the scale. It is ok initially but
sometimes I get non-rounded value shown in the inputbox (like xxx.yyy)
after zooming. I am using JSAPI. Do I have to round it somewhere in
"{$this->mszHTMLForm}.SCALE.value = goCWCJSAPI.oMap.scale;"? I suppose I
have to convert it to number first and then use riund function (or work
with scale value as string)...

thanks

dejan

_______________________________________________
Chameleon mailing list
Chameleon at lists.maptools.org
http://lists.maptools.org/mailman/listinfo/chameleon


Disclaimer
************************************************************************
Aan dit bericht kunnen geen rechten worden ontleend. Dit bericht is
uitsluitend bestemd voor de geadresseerde. Als u dit bericht per abuis
hebt ontvangen, wordt u verzocht het te vernietigen en de afzender te 
informeren. Wij adviseren u om bij twijfel over de juistheid of de 
volledigheid van de mail contact met afzender op te nemen.

This message shall not constitute any rights or obligations.
This message is intended solely for the addressee.
If you have received this message in error, please delete it and
notify the sender immediately. When in doubt whether this message
is correct or complete, please contact the sender.
************************************************************************