[FGS] Some modules don't install with self-installer
shawn barnes
sbarnes at dmsolutions.ca
Fri Jul 13 14:43:16 EDT 2007
Norm,
What is the fgs install command that you are using?
You have to explicitly install those modules.
$ fgs install gdal_ecw-module:1.3.2
$ fgs install gdal_python-module:1.3.2
$ fgs install python_mapscript:4.10.2
shawn
Normand Savard wrote:
> All,
>
> I build a fgs self-installer by specifying a list of desired modules but
> for some reason some of these modules don't install. I'm talking
> essentially about gdal_ecw-module, gdal_python and python_mapscript.
> The self-installer is created as specified in reference 1 and the output
> of the installation is as reference 2. If I create a self-installer
> with a minimal number of modules it works (see reference 3 and 4).
>
> Does someone know why?
>
> Norm
>
>
> -------------------------------
> Reference 1:
>
> nsavard at fusion:~/fgs-dev$ fgsdev build_si norm 2.0 mapserver-php
> chameleon-base php_mysql-module php_pdf-module php_pgsql-module
> libecw-base geos-lib gdal_python-module gdal_ecw-module
> python_mapscript-module
> * Creating archive file containing all required FGS modules...
> + Including base module... ok
> + Including mapserver-php version 4.10.2... ok
> + Including mapserver-base version 4.10.2... ok
> + Including apache-base version 1.3.34... ok
> + Including expat-base version 1.95.8... ok
> + Including gd-lib version 2.0.33... ok
> + Including jpeg-lib version 6b... ok
> + Including freetype-lib version 2.1.9... ok
> + Including libpng-lib version 1.2.8... ok
> + Including curl-lib version 7.15.0... ok
> + Including proj-lib version 4.5.0... ok
> + Including postgresql-lib version 8.0.7... ok
> + Including gdal-base version 1.4.2... ok
> + Including tiff-lib version 3.8.2... ok
> + Including libgeotiff-lib version 1.2.3... ok
> + Including netcdf-lib version 3.5.1... ok
> + Including openssl-lib version 0.9.8a... ok
> + Including xerces_c-base version 2_6_0... ok
> + Including unixODBC-base version 2.2.10... ok
> + Including libungif-base version 4.1.3... ok
> + Including libiconv-base version 1.9.1... ok
> + Including proj4_epsg42xxx-support version 1.0.0... ok
> + Including php-base version 4.4.2... ok
> + Including libxml2-base version 2.6.19... ok
> + Including chameleon-base version 2.2... ok
> + Including php_mysql-module version 4.4.2... ok
> + Including php_pdf-module version 4.4.2... ok
> + Including pdflib_lite-base version 6.0.3... ok
> + Including php_pgsql-module version 4.4.2... ok
> + Including libecw-base version 3.3.20060906... ok
> + Including geos-lib version 2.1.3... ok
> + Including gdal_python-module version 1.4.2... ok
> + Including python-base version 2.4... ok
> + Including gdal_ecw-module version 1.4.2... ok
> + Including python_mapscript-module version 4.10.2... ok
> * Creating self-extracting archive script
>
> * Self installer image created with success in
> '/home/users/nsavard/fgs-dev/modules/fgs-norm-2.0-linux-i386.bin'.
> * Versions info file is
> '/home/users/nsavard/fgs-dev/modules/fgs-norm-2.0-linux-i386.versions'.
>
> ------------------------------------
> Reference 2:
>
> Where do you want to install the FGS suite [/home/nsavard/fgs] ?
> /home/nsavard/fgs/fgsall2.0
>
>
> + Extracting fgs-base.tar.gz from /tmp/fgs-selfextract.ex4729...ok
> + Running base's installer
> + module : base
> + Running fgs install mapserver-php
> * Probing last version of module 'mapserver-php'... 4.10.2
> + Installing mapserver-php:
> + Getting and extracting module 'mapserver-php'... ok
> + Getting and extracting module 'mapserver-base'... ok
> + Getting and extracting module 'apache-base'... ok
> + Getting and extracting module 'expat-base'... ok
> + Getting and extracting module 'gd-lib'... ok
> + Getting and extracting module 'jpeg-lib'... ok
> + Getting and extracting module 'freetype-lib'... ok
> + Getting and extracting module 'libpng-lib'... ok
> + Getting and extracting module 'curl-lib'... ok
> + Getting and extracting module 'proj-lib'... ok
> + Getting and extracting module 'postgresql-lib'... ok
> + Getting and extracting module 'gdal-base'... ok
> + Getting and extracting module 'tiff-lib'... ok
> + Getting and extracting module 'libgeotiff-lib'... ok
> + Getting and extracting module 'netcdf-lib'... ok
> + Getting and extracting module 'openssl-lib'... ok
> + Getting and extracting module 'xerces_c-base'... ok
> + Getting and extracting module 'unixODBC-base'... ok
> + Getting and extracting module 'libungif-base'... ok
> + Getting and extracting module 'libiconv-base'... ok
> + Getting and extracting module 'proj4_epsg42xxx-support'... ok
> + Getting and extracting module 'php-base'... ok
> + Getting and extracting module 'libxml2-base'... ok
> + Copying all files into FGS environment... ok
> + Running apache-base's installation script :
> * *** Apache installation ***
> * Selecting TCP port... Example: 80, 8080, 8000
> ? What TCP port do you want to use [8080] :
> + Port selected : '8080'
> * You can start apache with : fgs start apache
> * *** End of Apache installation ***
> + Running gdal-base's installation script :
> + Running libgeotiff-lib's installation script :
> + Running mapserver-base's installation script :
> + Running php-base's installation script :
> + php4.ini file installed in
> /home/nsavard/fgs/fgsall2.0/www/conf/php4.ini.template
> + Running proj-lib's installation script :
> * Module 'mapserver-php' installed with success.
> ! You need to reload setenv.sh, run : cd /home/nsavard/fgs/fgsall2.0 ; .
> setenv.sh
> + Running fgs install chameleon-base
> * Probing last version of module 'chameleon-base'... 2.2
> + Installing chameleon-base:
> + Getting and extracting module 'chameleon-base'... ok
> + Copying all files into FGS environment... ok
> + Running chameleon-base's installation script :
> * Module 'chameleon-base' installed with success.
> + Running fgs install php_mysql-module
> * Probing last version of module 'php_mysql-module'... 4.4.2
> + Installing php_mysql-module:
> + Getting and extracting module 'php_mysql-module'... ok
> + Copying all files into FGS environment... ok
> * Module 'php_mysql-module' installed with success.
> + Running fgs install php_pdf-module
> * Probing last version of module 'php_pdf-module'... 4.4.2
> + Installing php_pdf-module:
> + Getting and extracting module 'php_pdf-module'... ok
> + Getting and extracting module 'pdflib_lite-base'... ok
> + Copying all files into FGS environment... ok
> * Module 'php_pdf-module' installed with success.
> + Running fgs install php_pgsql-module
> * Probing last version of module 'php_pgsql-module'... 4.4.2
> + Installing php_pgsql-module:
> + Getting and extracting module 'php_pgsql-module'... ok
> + Copying all files into FGS environment... ok
> * Module 'php_pgsql-module' installed with success.
> + Starting FGS's daemon:
> + Starting 'apache':
> Processing config directory: /home/nsavard/fgs/fgsall2.0/www/conf.d/*.conf
> Processing config file:
> /home/nsavard/fgs/fgsall2.0/www/conf.d/chameleon.conf
> Processing config file: /home/nsavard/fgs/fgsall2.0/www/conf.d/gdal.conf
> Processing config file:
> /home/nsavard/fgs/fgsall2.0/www/conf.d/mapserver.conf
> Processing config file: /home/nsavard/fgs/fgsall2.0/www/conf.d/php4.conf
> Processing config file: /home/nsavard/fgs/fgsall2.0/www/conf.d/proj.conf
> [Fri Jul 13 12:25:41 2007] [warn] NameVirtualHost *:8080 has no
> VirtualHosts
> /home/nsavard/fgs/fgsall2.0/etc/init.d/apache start: httpd started
>
> 111111111111111111111111111111111111111111111111111111111111111
>
> To start installed FGS's daemon at boot time, do (as root) :
>
> $ echo "su nsavard -c \"( . /home/nsavard/fgs/fgsall2.0/setenv.sh ; fgs
> start )\"" >> /etc/rc.d/rc.local
>
> 222222222222222222222222222222222222222222222222222222222222222
>
> Before using the FGS environment, you need to set some
> environment variables (each time you login) :
>
> $ cd /home/nsavard/fgs/fgsall2.0
> $ . setenv.sh
>
> OR you can do it automatically each time you log in by doing :
>
> echo ". /home/nsavard/fgs/fgsall2.0/setenv.sh" >> ~/.bashrc
>
> ****************************************************************
>
>
> ------------------------------------------
> Reference 3:
> nsavard at fusion:~/fgs-dev$ fgsdev build_si norm 1.0 gdal-base
> gdal_ecw-module
> * Creating archive file containing all required FGS modules...
> + Including base module... ok
> + Including gdal-base version 1.4.2... ok
> + Including jpeg-lib version 6b... ok
> + Including tiff-lib version 3.8.2... ok
> + Including postgresql-lib version 8.0.7... ok
> + Including proj-lib version 4.5.0... ok
> + Including libgeotiff-lib version 1.2.3... ok
> + Including netcdf-lib version 3.5.1... ok
> + Including openssl-lib version 0.9.8a... ok
> + Including xerces_c-base version 2_6_0... ok
> + Including unixODBC-base version 2.2.10... ok
> + Including libungif-base version 4.1.3... ok
> + Including libpng-lib version 1.2.8... ok
> + Including curl-lib version 7.15.0... ok
> + Including gdal_ecw-module version 1.4.2... ok
> + Including libecw-base version 3.3.20060906... ok
> * Creating self-extracting archive script
>
> * Self installer image created with success in
> '/home/users/nsavard/fgs-dev/modules/fgs-norm-1.0-linux-i386.bin'.
> * Versions info file is
> '/home/users/nsavard/fgs-dev/modules/fgs-norm-1.0-linux-i386.versions'.
>
>
>
>
>
>
> -----------------------------------------
> Reference 4:
>
>
> Where do you want to install the FGS suite [/home/nsavard/fgs] ?
> /home/nsavard/fgs/fgstestgdal
>
>
> + Extracting fgs-base.tar.gz from /tmp/fgs-selfextract.lO4196...ok
> + Running base's installer
> + module : base
> + Running fgs install gdal-base
> * Probing last version of module 'gdal-base'... 1.4.2
> + Installing gdal-base:
> + Getting and extracting module 'gdal-base'... ok
> + Getting and extracting module 'jpeg-lib'... ok
> + Getting and extracting module 'tiff-lib'... ok
> + Getting and extracting module 'postgresql-lib'... ok
> + Getting and extracting module 'proj-lib'... ok
> + Getting and extracting module 'libgeotiff-lib'... ok
> + Getting and extracting module 'netcdf-lib'... ok
> + Getting and extracting module 'openssl-lib'... ok
> + Getting and extracting module 'xerces_c-base'... ok
> + Getting and extracting module 'unixODBC-base'... ok
> + Getting and extracting module 'libungif-base'... ok
> + Getting and extracting module 'libpng-lib'... ok
> + Getting and extracting module 'curl-lib'... ok
> + Copying all files into FGS environment... ok
> + Running gdal-base's installation script :
> + Running libgeotiff-lib's installation script :
> + Running proj-lib's installation script :
> * Module 'gdal-base' installed with success.
> ! You need to reload setenv.sh, run : cd /home/nsavard/fgs/fgstestgdal ;
> . setenv.sh
> + Running fgs install gdal_ecw-module
> * Probing last version of module 'gdal_ecw-module'... 1.4.2
> + Installing gdal_ecw-module:
> + Getting and extracting module 'gdal_ecw-module'... ok
> + Getting and extracting module 'libecw-base'... ok
> + Copying all files into FGS environment... ok
> * Module 'gdal_ecw-module' installed with success.
> + Starting FGS's daemon:
>
> 111111111111111111111111111111111111111111111111111111111111111
>
> To start installed FGS's daemon at boot time, do (as root) :
>
> $ echo "su nsavard -c \"( . /home/nsavard/fgs/fgstestgdal/setenv.sh ;
> fgs start )\"" >> /etc/rc.d/rc.local
>
> 222222222222222222222222222222222222222222222222222222222222222
>
> Before using the FGS environment, you need to set some
> environment variables (each time you login) :
>
> $ cd /home/nsavard/fgs/fgstestgdal
> $ . setenv.sh
>
> OR you can do it automatically each time you log in by doing :
>
> echo ". /home/nsavard/fgs/fgstestgdal/setenv.sh" >> ~/.bashrc
>
> ****************************************************************
>
>
> _______________________________________________
> Foss-gis-suite mailing list
> Foss-gis-suite at lists.maptools.org
> http://lists.maptools.org/mailman/listinfo/foss-gis-suite
>
More information about the Foss-gis-suite
mailing list