<div dir="ltr"><div>I am confused about your question. You said "convert a .ecw file to a tiled tiff file" but you also said <br>"redo the .ecw with tiling". So do you want to read or write an ecw? <br><br></div><div>If you have an existing tiff and just need to change it to a tiled tiff and/or build overviews then that is pretty easy because you can skip the ecw part. If you need to write an ecw that's harder. If you can not get the FWTools working on your distribution then you will need to build gdal with ecw support, which requires getting the ecw sdk. Licensing has gotten tighter on the ecw format and it may be hard to get the sdk now. <br><br></div><div>Rich<br></div><div><br></div></div><div class="gmail_extra"><br><div class="gmail_quote">On Sun, Aug 16, 2015 at 3:59 PM, Evert Groenewald <span dir="ltr"><<a href="mailto:evert@coldsea.co.za" target="_blank">evert@coldsea.co.za</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Hallo list.<br>
Well, I hope the list is still active.<br>
My problem is that I am unable to get FWTools-2.0.6 running after<br>
completing ./sh.install. From the output in the console it installs ok,<br>
but I cannot get it running.<br>
Now I know FWTools is long out of date and all that. But I need it to<br>
convert a .ecw file to a tiled tiff file. I last did this about 5 years<br>
ago but forgot to ad the tiling option in, the .tiff file takes a bit<br>
long to adjust focus when zooming in or out because the whole image is<br>
reprojected instead of just the area viewed. I had no need to use the<br>
file a lot til now, so there was no pressing need to redo the conversion.<br>
5 years ago it took about 10 hours on a Core2Duo laptop, ten years ago<br>
it took 17 hours on a AMD dual core desktop. I've upgraded recently and<br>
would like to redo the .ecw with tiling.<br>
<br>
I have cd'd into the bin_safe directory in the console and entered the<br>
"sh openev" command, the "sh openev -h" command. Below I copied the<br>
output from the console.<br>
<br>
evert@linux-lbj2:~/FWTools-2.0.6/bin_safe> sh openev -h<br>
Setup for user installed hardware acceleration<br>
Traceback (most recent call last):<br>
File "/home/evert/FWTools-2.0.6/bin/../pymod/openev.py", line 80, in ?<br>
import gviewapp<br>
File "/home/evert/FWTools-2.0.6/bin/../pymod/gviewapp.py", line 136, in ?<br>
import gtk<br>
File "/home/evert/FWTools-2.0.6/lib/python2.2/site-packages/gtk.py",<br>
line 21, in ?<br>
import _gtk<br>
ImportError: libXi.so.6: cannot open shared object file: No such file or<br>
directory<br>
evert@linux-lbj2:~/FWTools-2.0.6/bin_safe> sh openev<br>
Default software rendering mode (use -h if accelerated video card<br>
installed).<br>
Traceback (most recent call last):<br>
File "/home/evert/FWTools-2.0.6/bin/../pymod/openev.py", line 80, in ?<br>
import gviewapp<br>
File "/home/evert/FWTools-2.0.6/bin/../pymod/gviewapp.py", line 136, in ?<br>
import gtk<br>
File "/home/evert/FWTools-2.0.6/lib/python2.2/site-packages/gtk.py",<br>
line 21, in ?<br>
import _gtk<br>
ImportError: libXi.so.6: cannot open shared object file: No such file or<br>
directory<br>
evert@linux-lbj2:~/FWTools-2.0.6/bin_safe><br>
<br>
<br>
So I found a old copy of FWTools on a old backup dvd,<br>
FWTools-linux-1.0.0a4 and unzipped it executed it, ran the "sh openev<br>
-h" command in the "bin_safe" directory. Pasted below is the output.<br>
<br>
<br>
evert@linux-lbj2:~/FWTools/FWTools-linux-1.0.0a4> cd bin_safe<br>
evert@linux-lbj2:~/FWTools/FWTools-linux-1.0.0a4/bin_safe> sh openev -h<br>
Setup for user installed hardware acceleration<br>
Traceback (most recent call last):<br>
File<br>
"/home/evert/FWTools/FWTools-linux-1.0.0a4/bin/../pymod/openev.py", line<br>
80, in ?<br>
import gviewapp<br>
File<br>
"/home/evert/FWTools/FWTools-linux-1.0.0a4/bin/../pymod/gviewapp.py",<br>
line 130, in ?<br>
import gtk<br>
File<br>
"/home/evert/FWTools/FWTools-linux-1.0.0a4/lib/python2.2/site-packages/gtk.py",<br>
line 21, in ?<br>
import _gtk<br>
ImportError: libXi.so.6: cannot open shared object file: No such file or<br>
directory<br>
evert@linux-lbj2:~/FWTools/FWTools-linux-1.0.0a4/bin_safe><br>
<br>
<br>
Very strange, error output are identical in both packages.<br>
<br>
Any ideas what is going on?<br>
<br>
Thanks in advance.<br>
<br>
<br>
evert<br>
<br>
_______________________________________________<br>
FWTools mailing list<br>
<a href="mailto:FWTools@lists.maptools.org">FWTools@lists.maptools.org</a><br>
<a href="http://lists.maptools.org/mailman/listinfo/fwtools" target="_blank">http://lists.maptools.org/mailman/listinfo/fwtools</a><br>
<a href="http://fwtools.maptools.org/" target="_blank">http://fwtools.maptools.org/</a><br>
</blockquote></div><br><br clear="all"><br>-- <br><div class="gmail_signature"><div dir="ltr">Richard W. Greenwood, PLS<br><a href="http://www.greenwoodmap.com" target="_blank">www.greenwoodmap.com</a></div></div>
</div>