[maplab-users] tutorial does not work

Wed, 01 Oct 2003 13:46:11 -0400

I just tried importing the map file

Import 3.x map -> tutorial.map
Save Map As -> mymap.map
Load Map -> mymap.map

Preview is still a black html page, viewing source it is identical to what I
was getting previously. Is there anything else I can check?

Ray Flanery

-----Original Message-----
From: maplab-users-admin@dmsolutions.ca
[mailto:maplab-users-admin@dmsolutions.ca] On Behalf Of Zak James
Sent: Monday, September 29, 2003 4:37 PM
To: Raymond E. Flanery, Jr.
Cc: maplab-users@dmsolutions.ca
Subject: Re: [maplab-users] tutorial does not work

Have you tried importing your map instead of just opening it (in the  
file selection pull down)? There are significant differences in the  
mapfiles and the tutorial map file has not been updated yet. Maplab may  
open some pre-4.0 maps, but preview can still run into problems  
rendering them unless they are converted first.

--
Zak James
Applications and Software Development
DM Solutions Group Inc.
http://www.dmsolutions.ca

On Monday, September 29, 2003, at 01:58 PM, Raymond E. Flanery, Jr.  
wrote:

> If I had any hair it would be pulled out by now! This should not be so
> difficult.
>
>
>
> WinXP Pro
>
> Apache 2.0.47 (Have also tried Apache 1.38)
>
> Php4.3.2 (running as cgi in Apache)
>
> Mapserver 4.0-beta2-win32-php4.3.2 (was using
> mapserver-4.1-dev-win32-php4.3.2 with same results)
>
> Maplab-2.1-RC1 (have also tried 2.0.1-release)
>
>
>
> Everything sets up fine, php test scripts show that things are  
> installed
> (including mapscript 4.0 dll).
>
> I have loggin turned on in maplab and the logs are written out fine.
>
> C:/tmp/ms_apps/ contains a whole bunch of 84byte png files (e.g.
> 1064855968_6_0_20_10.png) and 6kb associated .map files.
>
>
>
> However, no matter what I modify, everytime I try to preview the map  
> from
> MapEdit I get a blank page (the source for the page being displayed is:
>
> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
>
> <HTML><HEAD>
>
> <META http-equiv=Content-Type content="text/html;
> charset=iso-8859-1"></HEAD>
>
> <BODY></BODY></HTML>
>
>
>
> If I look in preview_mapedit.log, the last lines in the file are:
>
> [Mon.Sep.29.2003.13:43:20] fontset is
> F:\maplab-2.1-RC1\htdocs\tutorial\etc\fonts.txt
>
> [Mon.Sep.29.2003.13:43:20] symbolset is
> F:\maplab-2.1-RC1\htdocs\tutorial\etc\symbols.sym
>
> [Mon.Sep.29.2003.13:43:20] AppContext : getContextValue( rosa_file )
> starting
>
> [Mon.Sep.29.2003.13:43:20]   AppContext : getContextValue( rosa_file )
> starting
>
> [Mon.Sep.29.2003.13:43:20]     AppContext : rosa_file value is  
> rosa/rosa.jar
>
> [Mon.Sep.29.2003.13:43:20]   AppContext : getContextValue( rosa_file   
> ) done
>
> [Mon.Sep.29.2003.13:43:20] AppContext : getContextValue( rosa_file  )  
> done
>
> [Mon.Sep.29.2003.13:43:20] AppContext : getContextValue( zoom_factor )
> starting
>
> [Mon.Sep.29.2003.13:43:20]   AppContext : zoom_factor value is 2
>
> [Mon.Sep.29.2003.13:43:20] AppContext : getContextValue( zoom_factor   
> ) done
>
> [Mon.Sep.29.2003.13:43:20] AppContext : getContextValue( min_zoom_rect  
> )
> starting
>
> [Mon.Sep.29.2003.13:43:20]   AppContext : min_zoom_rect value is 5
>
> [Mon.Sep.29.2003.13:43:20] AppContext : getContextValue( min_zoom_rect  
>  )
> done
>
> [Mon.Sep.29.2003.13:43:20] MapSession_R : setTempDir() starting
>
> [Mon.Sep.29.2003.13:43:20] MapSession_R : setTempDir() done
>
> [Mon.Sep.29.2003.13:43:20] MapSession_R : restoreState() starting
>
> [Mon.Sep.29.2003.13:43:20]   MapSession_R : readMapFile() starting
>
> [Mon.Sep.29.2003.13:43:20]     MapSession_R : readMapFile - Open map
> file[c:/tmp/ms_tmp//3f786e4bcffd6.map] was successful
>
> [Mon.Sep.29.2003.13:43:20]   MapSession_R : readMapFile() done
>
> [Mon.Sep.29.2003.13:43:20] MapSession_R : restoreState() done
>
> [Mon.Sep.29.2003.13:43:20] MapSession_R : restoreState() starting
>
> [Mon.Sep.29.2003.13:43:20]   MapSession_R : readMapFile() starting
>
> [Mon.Sep.29.2003.13:43:20]     MapSession_R : readMapFile - Open map
> file[c:/tmp/ms_tmp//3f786e4bcffd6.map] was successful
>
> [Mon.Sep.29.2003.13:43:20]   MapSession_R : readMapFile() done
>
> [Mon.Sep.29.2003.13:43:20] MapSession_R : restoreState() done
>
> [Mon.Sep.29.2003.13:43:20] MapSession_R : processLegendTemplate()  
> starting
>
> [Mon.Sep.29.2003.13:43:20] MapSession_R : processLegendTemplate() done
>
> [Mon.Sep.29.2003.13:43:20] MapSession_R : saveState() starting
>
> [Mon.Sep.29.2003.13:43:20]   MapSession_R : saveState new ID =
> BBOX=-2594561.3533333,- 
> 712631,3467361.3533333,3840000|SRS=|LAYERS=0,1,2,3,4,
> 5,8
>
> [Mon.Sep.29.2003.13:43:20] MapSession_R : saveState() done
>
>
>
> What is going wrong? I have run out of ideas for settings to change.
>
>
>
> Ray Flanery
>
>

_______________________________________________
Maplab-users mailing list
Maplab-users@dmsolutions.ca
http://lists.dmsolutions.ca/mailman/listinfo/maplab-users