[TinyOWS-users] Problems saving with demo
Gissur Þórhallsson
gissur at loftmyndir.is
Fri Nov 4 08:20:42 EST 2011
Well, the log should be able to give you a clue as to what's going on.
On Thu, Nov 3, 2011 at 9:41 PM, Nicolas Ardissono <
nicolasardissono at yahoo.com.ar> wrote:
> **
> So, the problem must be openlayers. If you can add and remove features
> with qgis. I don't know where to look for.
>
>
> El 31/10/11 12:01, Gissur Þórhallsson escribió:
>
> Hello Nicolas,
>
> What does the log on the server say? I've also found it very helpful to
> also fiddle with the *log_level* parameters and see what pops out.
> Refer to http://www.tinyows.org/trac/wiki/ConfigFile for how to configure
> logging.
>
> I can on the other hand verify that your WFS is working fine - since I
> could connect to it from qgis and add/remove an island to the Faroe Islands.
>
> Kind regards,
> Gissur
>
> On Mon, Oct 31, 2011 at 3:41 AM, Nicolas Ardissono <
> nicolasardissono at yahoo.com.ar> wrote:
>
>> Hello, i'm a newy in this matter, and after a week i have installed the
>> tinyows demo in my server (debian squeeze) and i could make it work, all
>> layers are showing, but i cannot make it save.
>>
>> Any tip or help will be apreciate. I don't know what else try, i have no
>> more ideas.
>>
>> When i edit same features and click save this is what *firebug post*:
>>
>> <wfs:Transaction xmlns:wfs="http://www.opengis.net/wfs"<http://www.opengis.net/wfs>service="WFS" version="1.1.0" xsi:schemaLocation="http://www.opengis.net/wfs
>> http://schemas.opengis.net/wfs/1.1.0/wfs.xsd http://www.agpstracking.com/
>> http://www.agpstracking.com/cgi-bin/tinyows?service=wfs&request=DescribeFeatureType&version=1.1.0&typename=france"<http://www.opengis.net/wfshttp://schemas.opengis.net/wfs/1.1.0/wfs.xsdhttp://www.agpstracking.com/http://www.agpstracking.com/cgi-bin/tinyows?service=wfs&request=DescribeFeatureType&version=1.1.0&typename=france>xmlns:xsi=
>> "http://www.w3.org/2001/XMLSchema-instance"<http://www.w3.org/2001/XMLSchema-instance>
>> >
>> <wfs:Update typeName="feature:france" xmlns:feature=
>> "http://www.agpstracking.com/" <http://www.agpstracking.com/>>
>> <wfs:Property>
>> <wfs:Name>the_geom</wfs:Name>
>> <wfs:Value>
>> <gml:MultiSurface xmlns:gml="http://www.opengis.net/gml"<http://www.opengis.net/gml>srsName="EPSG:27582">
>> <gml:surfaceMember>
>> <ogc:Filter xmlns:ogc="http://www.opengis.net/ogc"<http://www.opengis.net/ogc>
>> >
>> <ogc:FeatureId></ogc:FeatureId>
>> </ogc:Filter>
>> </wfs:Update>
>> </wfs:Transaction>
>>
>>
>> *this is the tinyows response in firebug:*
>>
>> <?xml version='1.0' encoding='UTF-8'?><ows:ExceptionReport xmlns='http://www.opengis.net/ows' xmlns:ows='http://www.opengis.net/ows' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xsi:schemaLocation='http://www.opengis.net/ows http://schemas.opengis.net/ows/1.0.0/owsExceptionReport.xsd' version='1.1.0' language='en'> <ows:Exception exceptionCode='InvalidParameterValue' locator='request'> <ows:ExceptionText>XML request isn't valid</ows:ExceptionText> </ows:Exception></ows:ExceptionReport>
>>
>>
>>
>> This is what i have in:
>> */etc/tinyows.xml:*
>> <tinyows online_resource=
>> "http://www.agpstracking.com/cgi-bin/tinyows"<http://www.agpstracking.com/cgi-bin/tinyows>
>> schema_dir="/usr/local/share/tinyows/schema/" log_level="1"
>> log="/var/log/tinyows.log">
>>
>> <pg host="127.0.0.1" user="remise" password="12346"
>> dbname="tinyows_demo" port="5433"/>
>>
>> <metadata name="TinyOWS Server"
>> title="TinyOWS Server - Demo Service" />
>>
>> <layer retrievable="1"
>> writable="1"
>> ns_prefix="tows"
>> ns_uri="http://www.agpstracking.com/"<http://www.agpstracking.com/>
>> name="france"
>> server="http://www.agpstracking.com/"<http://www.agpstracking.com/>
>> title="French Administrative Sub Boundaries (IGN - GeoFLA
>> Departements)" />
>>
>> </tinyows>
>>
>>
>> *this is the javascript file:*
>>
>> var map, wfs;
>>
>> var DeleteFeature = OpenLayers.Class(OpenLayers.Control, {
>> initialize: function(layer, options) {
>> OpenLayers.Control.prototype.initialize.apply(this, [options]);
>> this.layer = layer;
>> this.handler = new OpenLayers.Handler.Feature(
>> this, layer, {click: this.clickFeature}
>> );
>> },
>> clickFeature: function(feature) {
>> // if feature doesn't have a fid, destroy it
>> if(feature.fid == undefined) {
>> this.layer.destroyFeatures([feature]);
>> } else {
>> feature.state = OpenLayers.State.DELETE;
>> this.layer.events.triggerEvent("afterfeaturemodified",
>> {feature: feature});
>> feature.renderIntent = "select";
>> this.layer.drawFeature(feature);
>> }
>> },
>> setMap: function(map) {
>> this.handler.setMap(map);
>> OpenLayers.Control.prototype.setMap.apply(this, arguments);
>> },
>> CLASS_NAME: "OpenLayers.Control.DeleteFeature"
>> });
>>
>>
>>
>> function showMsg(szMessage) {
>> window.alert(szMessage);
>> /*document.getElementById("message").innerHTML = szMessage;
>> setTimeout(
>> "document.getElementById('message').innerHTML = ''",2000);*/
>> };
>>
>> function showSuccessMsg(){
>> showMsg("Transaction successfully completed");
>> };
>>
>> function showFailureMsg(){
>> showMsg("An error occured while operating the transaction");
>> };
>>
>>
>> function init() {
>> map = new OpenLayers.Map('basicMap', {
>> projection: new OpenLayers.Projection("EPSG:27582"),
>> units: "m",
>> maxResolution: "auto",
>> maxExtent: new OpenLayers.Bounds(5000,1620000,1198000,2678000),
>> controls: [
>> new OpenLayers.Control.PanZoom()
>> ]
>> });
>> var base = new OpenLayers.Layer.WMS("OpenLayers WMS",
>> "http://www.geosignal.org/cgi-bin/wmsmap?"<http://www.geosignal.org/cgi-bin/wmsmap?>
>> ,
>> {layers: "Regions,Departements",
>> projection:"EPSG:27582",
>> displayProjection: new OpenLayers.Projection("EPSG:27582"),
>> units: "m",
>> maxResolution: "auto",
>> maxExtent: new OpenLayers.Bounds(5000,1620000,1198000,2678000),
>> sld:
>> "http://www.tinyows.org/tracdocs/demo/OpenLayers-2.9/examples/sld.xml"<http://www.tinyows.org/tracdocs/demo/OpenLayers-2.9/examples/sld.xml>
>> }
>> );
>>
>> map.addLayer(base);
>>
>> var saveStrategy = new OpenLayers.Strategy.Save();
>> saveStrategy.events.register("success", '', showSuccessMsg);
>> saveStrategy.events.register("fail", '', showFailureMsg);
>>
>> wfs = new OpenLayers.Layer.Vector("Editable Features", {
>> strategies: [new OpenLayers.Strategy.BBOX(), saveStrategy],
>> projection: new OpenLayers.Projection("EPSG:27582"),
>> protocol: new OpenLayers.Protocol.WFS({
>> version: "1.1.0",
>> srsName: "EPSG:27582",
>> url: "http://www.agpstracking.com/cgi-bin/tinyows?"<http://www.agpstracking.com/cgi-bin/tinyows?>
>> ,
>> featureType: "france",
>> featureNS: "http://www.agpstracking.com/"<http://www.agpstracking.com/>
>> ,
>> geometryName: "the_geom",
>> schema:
>> "http://www.agpstracking.com/cgi-bin/tinyows?service=wfs&request=DescribeFeatureType&version=1.1.0&typename=france"<http://www.agpstracking.com/cgi-bin/tinyows?service=wfs&request=DescribeFeatureType&version=1.1.0&typename=france>
>> ,
>> outputFormat: "application/json",
>> readFormat: new OpenLayers.Format.GeoJSON()
>> })
>> });
>>
>> map.addLayer(wfs);
>>
>> var panel = new OpenLayers.Control.Panel(
>> {'displayClass': 'customEditingToolbar'}
>> );
>>
>> var navigate = new OpenLayers.Control.Navigation({
>> title: "Pan Map"
>> });
>>
>> var draw = new OpenLayers.Control.DrawFeature(
>> wfs, OpenLayers.Handler.Polygon,
>> {
>> title: "Draw Feature",
>> displayClass: "olControlDrawFeaturePolygon",
>> multi: true
>> }
>> );
>>
>> var edit = new OpenLayers.Control.ModifyFeature(wfs, {
>> title: "Modify Feature",
>> displayClass: "olControlModifyFeature"
>> });
>>
>> var del = new DeleteFeature(wfs, {title: "Delete Feature"});
>>
>> var save = new OpenLayers.Control.Button({
>> title: "Save Changes",
>> trigger: function() {
>> if(edit.feature) {
>> edit.selectControl.unselectAll();
>> }
>> saveStrategy.save();
>> },
>> displayClass: "olControlSaveFeatures"
>> });
>>
>> panel.addControls([navigate, save, edit, draw, del]);
>> panel.defaultControl = navigate;
>> map.addControl(panel);
>> map.zoomToMaxExtent();
>>
>> }
>>
>>
>> *this is my html file:*
>>
>> <html>
>> <head>
>> <LINK REL=StyleSheet HREF='../estilo.css' TYPE='text/css'>
>> <link rel="stylesheet" href="theme/default/style.css" type="text/css" />
>> <script src="OpenLayers-2.9/OpenLayers.js"></script>
>> <script src="tinyows_wfs-t.js"></script>
>> </head>
>>
>> <body onload="init()">
>> <h1 id="title">WFS Transaction Example, (TinyOWS ans
>> OpenLayers)</h1>
>> <div id="tags"></div>
>> <p id="shortdesc">
>> Shows the use of the WFS Transactions (WFS-T).
>> Parks of Osnabruck (Frida).
>> <br />
>> Base layers is OpenStreetMap from Omniscale WMS Server.
>> </p>
>> <div id="basicMap"></div>
>>
>> <div id="message"></div>
>> <div id="docs">
>> <p>
>> The WFS protocol allows for creation of new features and
>> reading, updating, or deleting of existing features.
>> </p>
>> <p>
>> Use the tools to create, modify, and delete (in order
>> from left
>> to right) features. Use the save tool (picture of a disk)
>> to
>> save your changes. Use the navigation tool (hand) to stop
>> editing and use the mouse for map navigation.
>> </p>
>> <p>
>> See the <a href="tinyows_wfs-t.js" target="_blank">
>>
>> wfs-protocol-transactions.js source</a> to see how this
>> is done.
>> </p>
>> </div>
>> </body>
>> </html>
>>
>> THANKS
>>
>> _______________________________________________
>> TinyOWS-users mailing list
>> TinyOWS-users at lists.maptools.org
>> http://lists.maptools.org/mailman/listinfo/tinyows-users
>>
>>
>
>
> --
> Gissur Þórhallsson
>
> Loftmyndir ehf.
> Laugavegur 13
> IS 101 Reykjavík - Iceland
> sími (tel): (+354) 540 2500
> tölvupóstur (email): gissur at loftmyndir.is
>
>
> _______________________________________________
> TinyOWS-users mailing listTinyOWS-users at lists.maptools.orghttp://lists.maptools.org/mailman/listinfo/tinyows-users
>
>
>
> _______________________________________________
> TinyOWS-users mailing list
> TinyOWS-users at lists.maptools.org
> http://lists.maptools.org/mailman/listinfo/tinyows-users
>
>
--
Gissur Þórhallsson
Loftmyndir ehf.
Laugavegur 13
IS 101 Reykjavík - Iceland
sími (tel): (+354) 540 2500
tölvupóstur (email): gissur at loftmyndir.is
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.maptools.org/pipermail/tinyows-users/attachments/20111104/b289d2ec/attachment-0001.htm
More information about the TinyOWS-users
mailing list