[TinyOWS-users] Some features cannot be saved

[Toni Martínez]

Thanks Olivier. I set up check_valid_geom = "0" and now it is working.
I have some doubts anyway, why is my geometry not OGC SFS valid? because of
its self intersection? what are the benefits of having an OGC SFS valid
geometry? if benefits are fair, Should I better make my geometry valid
client side? in that case, what's the procedure?
Thanks again,
Toni M.

2011/10/14 Olivier Courtin <olivier.courtin at gmail.com>

> On Fri, Oct 14, 2011 at 2:44 PM, Toni Martínez <tmartinh at gmail.com> wrote:
>
> > But, I have found that some
> > cases, when saving TinyOws returns and error and those cases are when a
> > geometry has an "island" in the middle like this one
> > http://www.eurogeotecnica.com/images/geom1.png
> > If there is no island, then geometry gets saved.
>
>
> The geometry provided is not OGC SFS valid:
>
> NOTICE:  Self-intersection at or near point 541950 27835.8
>  st_isvalid
> ------------
>  f
>
>
> You could make it valid client side, or force it server side
> trought check_valid_geom option
>
> HTH,
>
> --
> Olivier
> _______________________________________________
> TinyOWS-users mailing list
> TinyOWS-users at lists.maptools.org
> http://lists.maptools.org/mailman/listinfo/tinyows-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.maptools.org/pipermail/tinyows-users/attachments/20111017/77433afa/attachment.htm