[Chameleon] Chameleon 1.1 Installation

[Bart van den Eijnden]

Hi,

did you make the changes to the sample application (index.phtml) as 
mentioned in the following e-mail:

http://lists.maptools.org/pipermail/chameleon/2004-January/000471.html

BTW: no map images are written to disk. Only buttons, scalebars and GML 
among others.

Best regards,
Bart

On Tue, 2 Mar 2004 17:17:12 +0100, Gianluigi Nozza 
<gianluigi.nozza@tiscali.it> wrote:

> Thank you Paul
>
> I have just take a look to your configuration files, and I have found 
> they looks very close to mine, apart Apache while I have IIS
> Meanwhile I was able to get the keymap and the widget to appear. I have 
> found that keymap seems to pretend an absolute path while the rest wants 
> a relative path, but not sure even of that.
> Besides I can't see any legend (I don't think this is how the sample has 
> to look like) Isn't it ?
> And the only widget that work is the ruler.
> I can see the north america map, but when I try to zoom I get a 405 
> error "page not found"
> I have checked if image files are written on the image temporary 
> directory but I can't find nothing else than the scalebar image.
> In other words it seems that chameleon does not write image file on 
> disk....
> So I'm figure out there is something worst than a simple wrong path 
> reference.....
>
> Hope some help from Heaven users....
>
> ----- Original Message -----
>   From: Paul Dymecki
>   To: Gianluigi Nozza
>   Sent: Tuesday, March 02, 2004 3:53 PM
>   Subject: RE: [Chameleon] Chameleon 1.1 Installation
>
>
>
>   Here you go,
>
>   -----Original Message-----
>   From: chameleon-admin@lists.maptools.org
>   [mailto:chameleon-admin@lists.maptools.org]On Behalf Of Gianluigi Nozza
>   Sent: Tuesday, March 02, 2004 8:27 AM
>   To: chameleon@lists.maptools.org
>   Subject: [Chameleon] Chameleon 1.1 Installation
>
>
>   Dear lister
>   With the help of the list, I made a little step toward the main goal 
> of the
>   "Chameleon 1.1 installation" with IIS and Windows 2000
>
>   I found very usefull the suggestion to include in the epsg proj file,
>   references for the two non standard projection of the sample 
> application.
>   # WGS84 Canada LCC (WARNING: FAKE EPSG CODE, NON STANDARD)
>   <42101> +proj=lcc +ellps=WGS84 +lat_0=0 +lon_0=-95 +lat_1=49 +lat_2=77
>   +x_0=0 +y_0=-8000000 +datum=WGS84 +units=m no_defs <>
>   # NAD83 Canada LCC (WARNING: FAKE EPSG CODE, NON STANDARD) (This is the
>   standard Atlas of Canada data's projection)
>   <42304> +proj=lcc +ellps=GRS80 +lat_0=49 +lon_0=-95 +lat_1=49 +lat_2=77
>   +datum=NAD83 +units=m no_defs <>
>
>   At that point I was able to start the sample application, but with the
>   following limits:
>   I can't see any widget,
>   No widget seems to work, apart for the distances ruler that works fine.
>   I can'see the keymap
>   When I try to zoom in, I can see the red rubberband but the I come up 
> with a
>   "missing page error"
>
>   At this point I believe that I have some failure in some path/url
>   specification
>
>   There will be someone in the universe using Chameleon 1.1 with IIS and
>   windows 2000 ?
>   I hope so. Will be that man/woman so kind to send me their working,
>
>   cwc2.xlm  configuration file
>   the sample map file properly configured (chameleon.map)
>   the sample template file properly configured (sample.html)
>
>   Thanks to everybody
>
>
>
>   _______________________________________________
>   Chameleon mailing list
>   Chameleon@lists.maptools.org
>   http://lists.maptools.org/mailman/listinfo/chameleon



--