[Chameleon] Chameleon 1.1 Installation

Tue, 02 Mar 2004 17:58:55 +0100

Hi,

your template HTML file (called sample.html probably in the htdocs 
subdirectory) has an HTML form in it:

<form method="post">

you should try changing this into:

<form method="post" action="index.phtml">

or into

<form method="post" 
action="http://yourserver:yourport/chameleon_demo/index.phtml">

or whatever URL you have configured in IIS for the sample application.

Good luck.

Best regards,
Bart

On Tue, 2 Mar 2004 17:47:51 +0100, Gianluigi Nozza 
<gianluigi.nozza@tiscali.it> wrote:

> Heaven answered !!!
> But it was too technical for me...
>
> Thank you Jason but I don't know what are "set the action" and 
> "redirection"
>
> Can you explain me step by step if is not too much complicated ?
> It seems to me I'am so close.....
>
> ----- Original Message -----
> From: "Jason Fournier" <jfournier@dmsolutions.ca>
> To: "Gianluigi Nozza" <gianluigi.nozza@tiscali.it>
> Cc: "Paul Dymecki" <pdymecki@sympatico.ca>; 
> <chameleon@lists.maptools.org>
> Sent: Tuesday, March 02, 2004 5:30 PM
> Subject: Re: [Chameleon] Chameleon 1.1 Installation
>
>
>> Regarding the Zoom In issue ...
>>
>> If you are using IIS you *may* have to set the action in the body to
>> index.phtml (ie, action="index.phtml").  If this does not work then a
>> redirect to http://path/to/chameleon/index.phtml prior to entering the
>> application may work.  This will set the URL to include index.phtml
>> (whereas default document hides it).
>>
>> Hope this helps,
>> Jason
>>
>>
>>
>> Gianluigi Nozza wrote:
>>
>> > Thank you Paul
>> >
>> > I have just take a look to your configuration files, and I have found
>> > they looks very close to mine, apart Apache while I have IIS
>> > Meanwhile I was able to get the keymap and the widget to appear. I
>> > have found that keymap seems to pretend an absolute path while the
>> > rest wants a relative path, but not sure even of that.
>> > Besides I can't see any legend (I don't think this is how the sample
>> > has to look like) Isn't it ?
>> > And the only widget that work is the ruler.
>> > I can see the north america map, but when I try to zoom I get a 405
>> > error "page not found"
>> > I have checked if image files are written on the image temporary
>> > directory but I can't find nothing else than the scalebar image.
>> > In other words it seems that chameleon does not write image file on
>> > disk....
>> > So I'm figure out there is something worst than a simple wrong path
>> > reference.....
>> >
>> > Hope some help from Heaven users....
>> >
>> > ----- Original Message -----
>> >
>> >     From: Paul Dymecki <mailto:pdymecki@sympatico.ca>
>> >     To: Gianluigi Nozza <mailto:gianluigi.nozza@tiscali.it>
>> >     Sent: Tuesday, March 02, 2004 3:53 PM
>> >     Subject: RE: [Chameleon] Chameleon 1.1 Installation
>> >
>> >
>> >     Here you go,
>> >
>> >     -----Original Message-----
>> >     From: chameleon-admin@lists.maptools.org
>> >     <mailto:chameleon-admin@lists.maptools.org>
>> >     [mailto:chameleon-admin@lists.maptools.org]On Behalf Of Gianluigi
>> >     Nozza
>> >     Sent: Tuesday, March 02, 2004 8:27 AM
>> >     To: chameleon@lists.maptools.org
> <mailto:chameleon@lists.maptools.org>
>> >     Subject: [Chameleon] Chameleon 1.1 Installation
>> >
>> >
>> >     Dear lister
>> >     With the help of the list, I made a little step toward the main
>> >     goal of the
>> >     "Chameleon 1.1 installation" with IIS and Windows 2000
>> >
>> >     I found very usefull the suggestion to include in the epsg proj
> file,
>> >     references for the two non standard projection of the sample
>> >     application.
>> >     # WGS84 Canada LCC (WARNING: FAKE EPSG CODE, NON STANDARD)
>> >     <42101> +proj=lcc +ellps=WGS84 +lat_0=0 +lon_0=-95 +lat_1=49
> +lat_2=77
>> >     +x_0=0 +y_0=-8000000 +datum=WGS84 +units=m no_defs <>
>> >     # NAD83 Canada LCC (WARNING: FAKE EPSG CODE, NON STANDARD) (This
>> >     is the
>> >     standard Atlas of Canada data's projection)
>> >     <42304> +proj=lcc +ellps=GRS80 +lat_0=49 +lon_0=-95 +lat_1=49
>> >     +lat_2=77
>> >     +datum=NAD83 +units=m no_defs <>
>> >
>> >     At that point I was able to start the sample application, but with
> the
>> >     following limits:
>> >     I can't see any widget,
>> >     No widget seems to work, apart for the distances ruler that works
>> >     fine.
>> >     I can'see the keymap
>> >     When I try to zoom in, I can see the red rubberband but the I come
>> >     up with a
>> >     "missing page error"
>> >
>> >     At this point I believe that I have some failure in some path/url
>> >     specification
>> >
>> >     There will be someone in the universe using Chameleon 1.1 with IIS
> and
>> >     windows 2000 ?
>> >     I hope so. Will be that man/woman so kind to send me their 
>> working,
>> >
>> >     cwc2.xlm  configuration file
>> >     the sample map file properly configured (chameleon.map)
>> >     the sample template file properly configured (sample.html)
>> >
>> >     Thanks to everybody
>> >
>> >
>> >
>> >     _______________________________________________
>> >     Chameleon mailing list
>> >     Chameleon@lists.maptools.org
>> >     http://lists.maptools.org/mailman/listinfo/chameleon
>> >
>>
>> --
>> ___________________________
>> Jason Fournier
>> DM Solutions Group
>> Application Developer
>> Ottawa, ON
>> 613.565.5056 x 18
>> jfournier@dmsolutions.ca
>>
>>
>>
>
>
> _______________________________________________
> Chameleon mailing list
> Chameleon@lists.maptools.org
> http://lists.maptools.org/mailman/listinfo/chameleon
>

-- 