[Chameleon] Chameleon 1.1 Installation

[Gianluigi Nozza]

Heaven answered !!!
But it was too technical for me...

Thank you Jason but I don't know what are "set the action" and "redirection"

Can you explain me step by step if is not too much complicated ?
It seems to me I'am so close.....

----- Original Message -----
From: "Jason Fournier" <jfournier@dmsolutions.ca>
To: "Gianluigi Nozza" <gianluigi.nozza@tiscali.it>
Cc: "Paul Dymecki" <pdymecki@sympatico.ca>; <chameleon@lists.maptools.org>
Sent: Tuesday, March 02, 2004 5:30 PM
Subject: Re: [Chameleon] Chameleon 1.1 Installation


> Regarding the Zoom In issue ...
>
> If you are using IIS you *may* have to set the action in the body to
> index.phtml (ie, action="index.phtml").  If this does not work then a
> redirect to http://path/to/chameleon/index.phtml prior to entering the
> application may work.  This will set the URL to include index.phtml
> (whereas default document hides it).
>
> Hope this helps,
> Jason
>
>
>
> Gianluigi Nozza wrote:
>
> > Thank you Paul
> >
> > I have just take a look to your configuration files, and I have found
> > they looks very close to mine, apart Apache while I have IIS
> > Meanwhile I was able to get the keymap and the widget to appear. I
> > have found that keymap seems to pretend an absolute path while the
> > rest wants a relative path, but not sure even of that.
> > Besides I can't see any legend (I don't think this is how the sample
> > has to look like) Isn't it ?
> > And the only widget that work is the ruler.
> > I can see the north america map, but when I try to zoom I get a 405
> > error "page not found"
> > I have checked if image files are written on the image temporary
> > directory but I can't find nothing else than the scalebar image.
> > In other words it seems that chameleon does not write image file on
> > disk....
> > So I'm figure out there is something worst than a simple wrong path
> > reference.....
> >
> > Hope some help from Heaven users....
> >
> > ----- Original Message -----
> >
> >     From: Paul Dymecki <mailto:pdymecki@sympatico.ca>
> >     To: Gianluigi Nozza <mailto:gianluigi.nozza@tiscali.it>
> >     Sent: Tuesday, March 02, 2004 3:53 PM
> >     Subject: RE: [Chameleon] Chameleon 1.1 Installation
> >
> >
> >     Here you go,
> >
> >     -----Original Message-----
> >     From: chameleon-admin@lists.maptools.org
> >     <mailto:chameleon-admin@lists.maptools.org>
> >     [mailto:chameleon-admin@lists.maptools.org]On Behalf Of Gianluigi
> >     Nozza
> >     Sent: Tuesday, March 02, 2004 8:27 AM
> >     To: chameleon@lists.maptools.org
<mailto:chameleon@lists.maptools.org>
> >     Subject: [Chameleon] Chameleon 1.1 Installation
> >
> >
> >     Dear lister
> >     With the help of the list, I made a little step toward the main
> >     goal of the
> >     "Chameleon 1.1 installation" with IIS and Windows 2000
> >
> >     I found very usefull the suggestion to include in the epsg proj
file,
> >     references for the two non standard projection of the sample
> >     application.
> >     # WGS84 Canada LCC (WARNING: FAKE EPSG CODE, NON STANDARD)
> >     <42101> +proj=lcc +ellps=WGS84 +lat_0=0 +lon_0=-95 +lat_1=49
+lat_2=77
> >     +x_0=0 +y_0=-8000000 +datum=WGS84 +units=m no_defs <>
> >     # NAD83 Canada LCC (WARNING: FAKE EPSG CODE, NON STANDARD) (This
> >     is the
> >     standard Atlas of Canada data's projection)
> >     <42304> +proj=lcc +ellps=GRS80 +lat_0=49 +lon_0=-95 +lat_1=49
> >     +lat_2=77
> >     +datum=NAD83 +units=m no_defs <>
> >
> >     At that point I was able to start the sample application, but with
the
> >     following limits:
> >     I can't see any widget,
> >     No widget seems to work, apart for the distances ruler that works
> >     fine.
> >     I can'see the keymap
> >     When I try to zoom in, I can see the red rubberband but the I come
> >     up with a
> >     "missing page error"
> >
> >     At this point I believe that I have some failure in some path/url
> >     specification
> >
> >     There will be someone in the universe using Chameleon 1.1 with IIS
and
> >     windows 2000 ?
> >     I hope so. Will be that man/woman so kind to send me their working,
> >
> >     cwc2.xlm  configuration file
> >     the sample map file properly configured (chameleon.map)
> >     the sample template file properly configured (sample.html)
> >
> >     Thanks to everybody
> >
> >
> >
> >     _______________________________________________
> >     Chameleon mailing list
> >     Chameleon@lists.maptools.org
> >     http://lists.maptools.org/mailman/listinfo/chameleon
> >
>
> --
> ___________________________
> Jason Fournier
> DM Solutions Group
> Application Developer
> Ottawa, ON
> 613.565.5056 x 18
> jfournier@dmsolutions.ca
>
>
>