[Chameleon] Upgrade problems to MapServer 4.4.2

[Jason Grimes]

Hi Bart,

Well I was using the latest 4.4.2 version from the MapServer web site. 
So I tried 4.4.1 and 4.6.0 but they all have the same problem.  I'm
going to have to revert back to 4.2.  Thanks,

Jason

On Mon, 2005-05-16 at 09:49, Bart van den Eijnden wrote:
> Hi Jason,
> 
> This bug was recently fixed if I recall correctly:
> 
> http://mapserver.gis.umn.edu/bugs/show_bug.cgi?id=1231
> 
> When writing the MAP file Mapscript should use quotes around the MIMETYPE  
> but apparently it does not in your version.
> 
> Do you really need that mimetype? You can also use MIMETYPE image/png that  
> will work for sure.
> 
> Best regards,
> Bart
> 
> On Mon, 16 May 2005 19:41:30 +0200, Jason Grimes <jgrimes at gi.alaska.edu>  
> wrote:
> 
> > Hi Bart,
> >
> > Thanks so much for your help.  On line 13 the map file in the session
> > had the following listing:
> >
> >     MIMETYPE image/png; mode=24bit
> >
> > It looks like MapServer does not like the "; mode=24bit"??
> >
> > Jason
> >
> > On Sat, 2005-05-14 at 01:03, Bart van den Eijnden wrote:
> >> Try and examine your session MAP file, and then especially around the
> >> OUTPUTFORMAT object.
> >>
> >> Best regards,
> >> Bart
> >>
> >> On Sat, 14 May 2005 02:01:27 +0200, Jason Grimes <jgrimes at gi.alaska.edu>
> >> wrote:
> >>
> >> > Here is an update on what I have found.  It looks to be a problem in  
> >> the
> >> > PHP sessions.  Chameleon errors out when map_session_mode=1.  If I  
> >> copy
> >> > the URL and change the map_session_mode to 0 it works. If I try and do
> >> > anything in the interface, like pan or activate a layer, the page does
> >> > not load at all and I get the following errors in the /tmp/php.log  
> >> file:
> >> >
> >> > [13-May-2005 14:24:37] PHP Warning:  [MapServer Error]:
> >> > loadOutputFormat(): Parsing error near (;):(line 13)
> >> >  in
> >> >  
> >> /usr/local/chameleon/chameleon-2.1pr1-20050412/htdocs/common/wrapper/map_session.php
> >> > on line 215
> >> > [13-May-2005 14:24:37] PHP Warning:  Failed to open map file
> >> > /tmp/sess_428529221db94/1116023074-2494.map in
> >> >  
> >> /usr/local/chameleon/chameleon-2.1pr1-20050412/htdocs/common/wrapper/map_session.php
> >> > on line 215
> >> > [13-May-2005 14:24:38] PHP Fatal error:  Call to a member function on  
> >> a
> >> > non-object in
> >> >  
> >> /usr/local/chameleon/chameleon-2.1pr1-20050412/htdocs/widgets/KeyMapDHTML/KeyMapDHTML.widget.php
> >> > on line 150
> >> >
> >> > Any ideas?  I'm going to poke through the code and track down the
> >> > map_session_mode and see if there is a problem there.  I know that  
> >> 1=R/W
> >> > session and 0=Read Only session.  Thanks,
> >> >
> >> > Jason
> >> >
> >> > On Wed, 2005-05-11 at 09:50, Jason Grimes wrote:
> >> >> Hi Bart,
> >> >>
> >> >> I'm running 2.1pr1-20050412.  I modified my php.ini file but nothing  
> >> was
> >> >> written to the error log file.  Also no errors in the Apache log
> >> >> either.  I will try going back to version 2.0 and see if that makes  
> >> any
> >> >> difference.  Thanks,
> >> >>
> >> >> Jason
> >> >>
> >> >> On Tue, 2005-05-10 at 23:09, Bart van den Eijnden wrote:
> >> >> > Hi Jason,
> >> >> >
> >> >> > could you log your php errors to a file, in php.ini:
> >> >> >
> >> >> > display_errors = Off
> >> >> > log_errors = On
> >> >> > error_log = d:/temp/php.log
> >> >> >
> >> >> > And check your logfile afterwards?
> >> >> >
> >> >> > Which version of Chameleon are you using btw? I have no trouble
> >> >> running Chameleon 2.0 in combination with Mapserver 4.4.2.
> >> >> >
> >> >> > Best regards,
> >> >> > Bart
> >> >> >
> >> >> > Bart van den Eijnden
> >> >> > Syncera-ITSolutions
> >> >> > Postbus 270
> >> >> > 2600 AG  DELFT
> >> >> >
> >> >> > tel.nr.: 015-7512436
> >> >> > email: BEN at Syncera-ITSolutions.nl
> >> >> >
> >> >> > >>> Jason Grimes <jgrimes at gi.alaska.edu> 05/11/05 01:56am >>>
> >> >> > Hi All,
> >> >> >
> >> >> > I have upgraded to MapServer 4.4.2 from version 4.2.2 and now all I
> >> >> get
> >> >> > in Chameleon is the following error:
> >> >> >
> >> >> > Error rendering map image:
> >> >> > A fatal error has occurred restoring your session.
> >> >> > Please restart the application.
> >> >> >
> >> >> > I haven't changed anything in my Chameleon configuration.  Here is  
> >> the
> >> >> > URL that Chameleon is sending:
> >> >> >
> >> >> >  
> >> https://phobos.gina.alaska.edu/chameleon//common//wrapper/drawmap.php?
> >> >> > map_session_mode=1&run_query=0&sid=4281468778a3b&
> >> >> > dummy=0.08096400+1115768456&UniqId=1115768456785264
> >> >> >
> >> >> > When I checked the archived messages for this I came across the  
> >> error
> >> >> > about map_session_mode=1.  I checked my php.ini file and the
> >> >> > session.use_trans_sid parameter is set to 0.  If I hand enter the  
> >> URL
> >> >> > into the browser it still returns the same error whether or not it  
> >> is
> >> >> > set to a 1 or a 0. Most everything was working fine with MapServer
> >> >> > 4.2.2, do I need to reinstall that version?  I have also upgraded
> >> >> proj,
> >> >> > freetype, and gd.  Thanks,
> >> >> >
> >> >> > Jason
> >> >> >
> >> >> > _______________________________________________
> >> >> > Chameleon mailing list
> >> >> > Chameleon at lists.maptools.org
> >> >> > http://lists.maptools.org/mailman/listinfo/chameleon
> >> >> >
> >> >>
> >> >> _______________________________________________
> >> >> Chameleon mailing list
> >> >> Chameleon at lists.maptools.org
> >> >> http://lists.maptools.org/mailman/listinfo/chameleon
> >> >
> >> > _______________________________________________
> >> > Chameleon mailing list
> >> > Chameleon at lists.maptools.org
> >> > http://lists.maptools.org/mailman/listinfo/chameleon
> >> >
> >>
> >>
> >
> >
> 
>