[Chameleon] EXPRESSIONBUILDER WIDGET

[Eijnden, B. van den (Bart)]

Hi,
 
you need to define your layer type in your WFS server MAP file.
 
Something like:
 
     "gml_geometries" "geometry"    # name you want for the geometry
attribute of your feature type
     "gml_geometry_type" "multipolygon"    # geometry should be the value of
gml_geometries!
 
Best regards,
Bart


-----Oorspronkelijk bericht-----
Van: chameleon-bounces at lists.maptools.org
[mailto:chameleon-bounces at lists.maptools.org]Namens Mony
Verzonden: donderdag 23 maart 2006 15:39
Aan: Chameleon
Onderwerp: [Chameleon] EXPRESSIONBUILDER WIDGET


Hi all,
I am using the expressionbuilder widget but I have problem with the type
layer, no recognize if is LiNE pOLYGON OR POINT.
Anyone can help me?
thanks in advance
bye
Mony




Disclaimer
************************************************************************
Aan dit bericht kunnen geen rechten worden ontleend. Dit bericht is
uitsluitend bestemd voor de geadresseerde. Als u dit bericht per abuis
hebt ontvangen, wordt u verzocht het te vernietigen en de afzender te 
informeren. Wij adviseren u om bij twijfel over de juistheid of de 
volledigheid van de mail contact met afzender op te nemen.

This message shall not constitute any rights or obligations.
This message is intended solely for the addressee.
If you have received this message in error, please delete it and
notify the sender immediately. When in doubt whether this message
is correct or complete, please contact the sender.
************************************************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.maptools.org/pipermail/chameleon/attachments/20060323/2da7dc12/attachment.html