[FWTools] Batch processing with FWTools in Windows

[Travis Kirstine GIS Tech]

You must use the CALL command when calling a batch file in Windows i.e.

CALL gdal_merge.bat -o output.tif image1.tif image2.tif

You shouldn't need it for the gdal_translate command.

Travis

-----Original Message-----
From: fwtools-bounces at lists.maptools.org
[mailto:fwtools-bounces at lists.maptools.org]On Behalf Of
Jeff.Pace at co.manatee.fl.us
Sent: Wednesday, July 05, 2006 11:53 AM
To: fwtools at lists.maptools.org
Subject: [FWTools] Batch processing with FWTools in Windows


I am trying to running a set of conversion (gdal_merge and gdal_translate) 
commands thru FWTools.  I have about 100 commands to run. 

As I would normally do, i wrote a .bat text file with all 100 commands in 
it.  I then ran the .bat from the FWTools command shell.  The first 
command reads fine, however when it completes it stops and does not 
proceed to the second command.  The process take about 30 minutes each so 
it isnt possible for me to launch each of the 100 commands seperately.

Is there a way to send batch commands to the Windows FWtools cmd shell?

-Jeff


Jeffrey Pace
Sr. Systems Analyst
Geographic Information Services Department
1112 Manatee Avenue West
Bradenton, FL 34205

jeff.pace at co.manatee.fl.us
(941)749-3075 x3557
_______________________________________________
FWTools mailing list
FWTools at lists.maptools.org
http://lists.maptools.org/mailman/listinfo/fwtools
http://fwtools.maptools.org/