[maplab-users] how to move from local computer to the web

[Stephen Wallace]

Tyler

You are correct that I plan on using a ISP and I do not know what my
permissions are. I will check this morning.
My "local computer is not connected to the web on a full time basis, so
could not be used for a host.

Thanks for the reply

Steve

-----Original Message-----
From: Tyler Mitchell [mailto:TMitchell@lignum.com]
Sent: December 8, 2003 11:15 AM
To: gis@gisrs.com
Cc: maplab-users@lists.maptools.org
Subject: Re: [maplab-users] how to move from local computer to the web







Hi Stephen, Congratulations on being able to make the next step!  The
simplest scenario would be to duplicate your ms4w and maplab setups to
this external server - it depends what you mean by external and what
kind of access/permissions you have.  Do you have access to installing
programs on the web server?  I'm assuming you have an account with an
ISP that you want to use which usually is pretty limited.  That could be
tricky and not very profitable, others on the list will probably know
better.

There are some mechanisms that would allow you, if possible, to have an
external web page calling on mapserver on another computer - if your
"local" computer is accessible via the internet, this may be the best
way to go.  But, granted, I'm not familiar with your setup.  Let us know
some more.

tyler




             "Stephen Wallace"

             <gis@gisrs.com>

             Sent by:
To
             maplab-users-admi
<mapserver-users@lists.gis.umn.edu>
             n@lists.maptools.
cc
             org                       <maplab-users@lists.maptools.org>

                                                                    Fax
to


             12/06/2003 12:21
Subject
             PM                        [maplab-users] how to move from

                                       local computer to the web



             Please respond to

              <gis@gisrs.com>











To the list

I have been working with ms4w and MapLab using the apache server on my
computer. Now I want to move the present results and future work to my
web site. Can some one on the list point me to instructions on how I set
up mapserver on my external web server.

Thank You

Stephen Wallace

Email gis@gisrs.com