MapTools.org

[maplab-users] Fatal error: Maximum execution time of 30 seconds exceeded

Andrew Bailey andy@planetnomad.com
Thu, 2 Jan 2003 21:20:49 -0000
This is a multi-part message in MIME format.

------=_NextPart_000_004B_01C2B2A4.D25EBD00
Content-Type: multipart/alternative;
	boundary="----=_NextPart_001_004C_01C2B2A4.D25EBD00"


------=_NextPart_001_004C_01C2B2A4.D25EBD00
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Fatal error: Maximum execution time of 30 seconds exceeded in =
C:\maplab\maplab-2.0rc3\htdocs\mapedit\globprefs.php on line 81

Hi there,
I'm getting this error when running mapedit. Is there a way i can extend =
the execution time permitted? I've scanned through my php.ini but =
couldn't find it.

[I'm totally new to MapServer and MapLab but can't wait to get it =
running successfully. I normally develop ASP-driven websites with =
ArcIMS/ArcSDE and it's a joy to see maplab and mapserver out there doing =
it on a open source level. congratulations.]

I'm running IIS 5 on XP Pro. I've attached my settings.

Regards,
Andrew Bailey
London, UK.

------=_NextPart_001_004C_01C2B2A4.D25EBD00
Content-Type: text/html;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2716.2200" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2><FONT size=3D3><FONT=20
face=3D"Times New Roman"><STRONG>Fatal error</STRONG>: Maximum execution =
time of=20
30 seconds exceeded in=20
<B>C:\maplab\maplab-2.0rc3\htdocs\mapedit\globprefs.php</B> on line=20
<B>81</B></FONT></FONT><BR></FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Hi there,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I'm getting this error when running =
mapedit. Is=20
there a way&nbsp;i can extend the execution time permitted? I've scanned =
through=20
my php.ini but couldn't find it.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>[I'm totally new to MapServer and =
MapLab but can't=20
wait to get it running successfully. I normally develop ASP-driven =
websites with=20
ArcIMS/ArcSDE and it's a joy to see maplab and mapserver out there doing =
it on a=20
open source level. congratulations.]</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>I'm running IIS 5 on XP Pro. I've =
attached my=20
settings.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2>Regards,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Andrew Bailey</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>London, UK.</DIV></FONT></BODY></HTML>

------=_NextPart_001_004C_01C2B2A4.D25EBD00--

------=_NextPart_000_004B_01C2B2A4.D25EBD00
Content-Type: text/xml;
	name="mapedit.xml"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
	filename="mapedit.xml"

<app-context>=0A=
    <include-context>=0A=
        <context-name>MapLab</context-name>=0A=
        =
<context-file>c:/maplab/maplab-2.0rc3/config/maplab.xml</context-file>=0A=
    </include-context>=0A=
=0A=
    <context-param>=0A=
        <param-name>configuration_file</param-name>=0A=
        <param-value>mapserv_36.xml</param-value>=0A=
        <description>The configuration file that defines the structure =
of a map file.  RECOMMENDED FOR ADVANCED USERS ONLY.</description>=0A=
    </context-param>=0A=
=0A=
    <context-param>=0A=
        <param-name>min_zoom_rect</param-name>=0A=
        <param-value>5</param-value>=0A=
        <description>The smallest rectangle size in pixels for zooming, =
everything                     else will be treated as a point =
zoom.</description>=0A=
    </context-param>=0A=
=0A=
    <context-param>=0A=
        <param-name>zoom_factor</param-name>=0A=
        <param-value>2</param-value>=0A=
        <description>Amount to zoom in/out by.</description>=0A=
    </context-param>=0A=
=0A=
    <context-param>=0A=
        <param-name>warehouse_mapfiles</param-name>=0A=
        <param-value></param-value>=0A=
        <description>Separated by a "|", this list of mapfiles is used =
in "Import Layer".  THIS PARAMETER IS OPTIONAL.</description>=0A=
    </context-param>=0A=
=0A=
</app-context>
------=_NextPart_000_004B_01C2B2A4.D25EBD00
Content-Type: text/xml;
	name="maplab.xml"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
	filename="maplab.xml"

<app-context>=0A=
    <context-param>=0A=
        <param-name>app_path</param-name>=0A=
        <param-value>c:/maplab/maplab-2.0rc3</param-value>=0A=
        <description>Absolute path to MapLab installation =
directory.</description>=0A=
    </context-param>=0A=
=0A=
    <context-param>=0A=
        <param-name>file_browser_root</param-name>=0A=
        <param-value>c:/maplab/maplab-2.0rc3</param-value>=0A=
        <description>Absolute path to the root directory for the file =
browser dialog.  This will be the highest directory a user can browse to =
in the file browser dialog.</description>=0A=
    </context-param>=0A=
=0A=
    <context-param>=0A=
        <param-name>allow_browsing</param-name>=0A=
        <param-value>true</param-value>=0A=
        <description>Allow browsing on the server : true is yes and =
false is no.</description>=0A=
    </context-param>=0A=
=0A=
    <context-param>=0A=
        <param-name>group_name</param-name>=0A=
        <param-value>users</param-value>=0A=
        <description>UNIX ONLY: Group name used when creating a new file =
or project. Used for permission access. The Web Server user must be a =
member of this group in order for this to work.</description>=0A=
    </context-param>=0A=
=0A=
    <context-param>=0A=
        <param-name>new_file_permission</param-name>=0A=
        <param-value>0664</param-value>=0A=
        <description>UNIX ONLY: New file permission in 0XXX format. =
First digit must always be 0. Second is for owner permission and must =
always be equal or greater than 6, third for group and last one for =
other. Possible values for each three permission is 7 (read, write and =
execute), 6 (read and write), 5 (read and execute), 4 (read =
only).</description>=0A=
    </context-param>=0A=
=0A=
    <context-param>=0A=
        <param-name>mapscript_module</param-name>=0A=
        <param-value>php_mapscript.dll</param-value>=0A=
        <description>Mapscript module name (i.e. php_mapscript_36.dll =
for Windows installations or php_mapscript.so for Unix =
installations).</description>=0A=
    </context-param>=0A=
=0A=
    <context-param>=0A=
        <param-name>log_path</param-name>=0A=
        <param-value>c:/temp/</param-value>=0A=
        <description>Directory in which to write log files.</description>=0A=
    </context-param>=0A=
=0A=
    <context-param>=0A=
        <param-name>log_level</param-name>=0A=
        <param-value>LOG_OFF</param-value>=0A=
        <description>Control the application runtime logging level.  =
Must be one of LOG_OFF, LOG_QUIET, LOG_VERBOSE or LOG_ALL.</description>=0A=
    </context-param>=0A=
=0A=
    <context-param>=0A=
        <param-name>tmp_map_path</param-name>=0A=
        <param-value>c:/maplab/tmp_map_path/</param-value>=0A=
        <description>Directory in which to write tmp map =
files.</description>=0A=
    </context-param>=0A=
=0A=
    <context-param>=0A=
        <param-name>tmp_img_path</param-name>=0A=
        <param-value>c:/inetpub/wwwroot/tmp/</param-value>=0A=
        <description>Directory in which to write temporary image =
files.</description>=0A=
    </context-param>=0A=
=0A=
    <context-param>=0A=
        <param-name>tmp_web_img_path</param-name>=0A=
        <param-value>/tmp/</param-value>=0A=
        <description>URL where browser can find temporary image (see =
tmp_image_path).</description>=0A=
    </context-param>=0A=
=0A=
    <context-param>=0A=
        <param-name>image_type</param-name>=0A=
        <param-value>PNG</param-value>=0A=
        <description>Output image type (eg: PNG, GIF). Must be =
uppercase. This image format MUST be supported by your browser and GD =
(on the server). Please don't change that value unless you know what =
you'r doing.</description>=0A=
    </context-param>=0A=
=0A=
    <context-param>=0A=
        <param-name>rosa_file</param-name>=0A=
        <param-value>rosa/rosa.jar</param-value>=0A=
        <description>Path to ROSA Java Applet.  THIS MUST BE A RELATIVE =
PATH.</description>=0A=
    </context-param>=0A=
=0A=
    <context-param>=0A=
        <param-name>default_navigation_mode</param-name>=0A=
        <param-value>ROSA</param-value>=0A=
        <description>The default mode of the map preview.  Must be =
either ROSA or HTML.</description>=0A=
    </context-param>=0A=
=0A=
    <context-param>=0A=
        <param-name>execution_mode</param-name>=0A=
        <param-value>2</param-value>=0A=
        <description>MapEdit execution mode (0 =3D> DEMO, 1 =3D> NORMAL, =
2 =3D> EXPERT).</description>=0A=
    </context-param>=0A=
=0A=
    <context-param>=0A=
        <param-name>demo_path</param-name>=0A=
        <param-value></param-value>=0A=
        <description>MapEdit DEMO mapfile path (when DEMO mode is =
set.)</description>=0A=
    </context-param>=0A=
=0A=
    <context-param>=0A=
        <param-name>allow_config</param-name>=0A=
        <param-value>TRUE</param-value>=0A=
        <description>This paramter controls access to the XML =
configuration tool by enabling/disabling the toolbar =
button.</description>=0A=
    </context-param>=0A=
=0A=
    <context-param>=0A=
        <param-name>version</param-name>=0A=
        <param-value>2.0rc3</param-value>=0A=
        <description>MapLab Suite version. This value is set by =
Makefile.  YOU DO NOT NEED TO MODIFY THIS VALUE.</description>=0A=
    </context-param>=0A=
=0A=
    <context-param>=0A=
        <param-name>installed_packages</param-name>=0A=
        <param-value>|MapEdit |MapBrowser |GMapFactory</param-value>=0A=
        <description>Currently installed packages separated by "|". This =
value is set by Makefile. YOU DO NOT NEED TO MODIFY THIS =
VALUE.</description>=0A=
    </context-param>=0A=
=0A=
    <context-param>=0A=
        <param-name>build_date</param-name>=0A=
        <param-value>Wed Oct 30 13:44:41 EST 2002</param-value>=0A=
        <description>Build date and time. This value is set by Makefile. =
YOU DO NOT NEED TO MODIFY THIS VALUE.</description>=0A=
    </context-param>=0A=
=0A=
</app-context>
------=_NextPart_000_004B_01C2B2A4.D25EBD00
Content-Type: application/octet-stream;
	name="php.ini"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
	filename="php.ini"

[PHP]

;;;;;;;;;;;
; WARNING ;
;;;;;;;;;;;
; This is the default settings file for new PHP installations.
; By default, PHP installs itself with a configuration suitable for
; development purposes, and *NOT* for production purposes.
; For several security-oriented considerations that should be taken
; before going online with your site, please consult php.ini-recommended
; and http://php.net/manual/en/security.php.


;;;;;;;;;;;;;;;;;;;
; About this file ;
;;;;;;;;;;;;;;;;;;;
; This file controls many aspects of PHP's behavior.  In order for PHP =
to
; read it, it must be named 'php.ini'.  PHP looks for it in the current
; working directory, in the path designated by the environment variable
; PHPRC, and in the path that was defined in compile time (in that =
order).
; Under Windows, the compile-time path is the Windows directory.  The
; path in which the php.ini file is looked for can be overridden using
; the -c argument in command line mode.
;
; The syntax of the file is extremely simple.  Whitespace and Lines
; beginning with a semicolon are silently ignored (as you probably =
guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.
;
; Directives are specified using the following syntax:
; directive =3D value
; Directive names are *case sensitive* - foo=3Dbar is different from =
FOO=3Dbar.
;
; The value can be a string, a number, a PHP constant (e.g. E_ALL or =
M_PI), one
; of the INI constants (On, Off, True, False, Yes, No and None) or an =
expression
; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
;
; Expressions in the INI file are limited to bitwise operators and =
parentheses:
; |        bitwise OR
; &        bitwise AND
; ~        bitwise NOT
; !        boolean NOT
;
; Boolean flags can be turned on using the values 1, On, True or Yes.
; They can be turned off using the values 0, Off, False or No.
;
; An empty string can be denoted by simply not writing anything after =
the equal
; sign, or by using the None keyword:
;
;  foo =3D         ; sets foo to an empty string
;  foo =3D none    ; sets foo to an empty string
;  foo =3D "none"  ; sets foo to the string 'none'
;
; If you use constants in your value, and these constants belong to a
; dynamically loaded extension (either a PHP extension or a Zend =
extension),
; you may only use these constants *after* the line that loads the =
extension.
;
; All the values in the php.ini-dist file correspond to the builtin
; defaults (that is, if no php.ini is used, or if you delete these =
lines,
; the builtin defaults will be identical).


;;;;;;;;;;;;;;;;;;;;
; Language Options ;
;;;;;;;;;;;;;;;;;;;;

; Enable the PHP scripting language engine under Apache.
engine =3D On

; Allow the <? tag.  Otherwise, only <?php and <script> tags are =
recognized. =20
; NOTE: Using short tags should be avoided when developing applications =
or
; libraries that are meant for redistribution, or deployment on PHP
; servers which are not under your control, because short tags may not
; be supported on the target server. For portable, redistributable code,
; be sure not to use short tags.
short_open_tag =3D On

; Allow ASP-style <% %> tags.
asp_tags =3D Off

; The number of significant digits displayed in floating point numbers.
precision    =3D  12

; Enforce year 2000 compliance (will cause problems with non-compliant =
browsers)
y2k_compliance =3D On

; Output buffering allows you to send header lines (including cookies) =
even
; after you send body content, at the price of slowing PHP's output =
layer a
; bit.  You can enable output buffering during runtime by calling the =
output
; buffering functions.  You can also enable output buffering for all =
files by
; setting this directive to On.  If you wish to limit the size of the =
buffer
; to a certain size - you can use a maximum number of bytes instead of =
'On', as
; a value for this directive (e.g., output_buffering=3D4096).
output_buffering =3D Off

; You can redirect all of the output of your scripts to a function.  For
; example, if you set output_handler to "mb_output_handler", character
; encoding will be transparently converted to the specified encoding.
; Setting any output handler automatically turns on output buffering.
; Note: People who wrote portable scripts should not depend on this ini
;       directive. Instead, explicitly set the output handler using =
ob_start().
;       Using this ini directive may cause problems unless you know what =
script=20
;       is doing.
; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
;       and you cannot use both "ob_gzhandler" and =
"zlib.output_compression".=20
;output_handler =3D

; Transparent output compression using the zlib library
; Valid values for this option are 'off', 'on', or a specific buffer =
size
; to be used for compression (default is 4KB)
; Note: Resulting chunk size may vary due to nature of compression. PHP=20
;       outputs chunks that are few hundreds bytes each as a result of=20
;       compression. If you prefer a larger chunk size for better=20
;       performance, enable output_buffering in addition.
; Note: You need to use zlib.output_handler instead of the standard
;       output_handler, or otherwise the output will be corrupted.
zlib.output_compression =3D Off

; You cannot specify additional output handlers if =
zlib.output_compression
; is activated here. This setting does the same as output_handler but in
; a different order.
;zlib.output_handler =3D

; Implicit flush tells PHP to tell the output layer to flush itself
; automatically after every output block.  This is equivalent to calling =
the
; PHP function flush() after each and every call to print() or echo() =
and each
; and every HTML block.  Turning this option on has serious performance
; implications and is generally recommended for debugging purposes only.
implicit_flush =3D Off

; The unserialize callback function will called (with the undefind =
class'
; name as parameter), if the unserializer finds an undefined class
; which should be instanciated.
; A warning appears if the specified function is not defined, or if the
; function doesn't include/implement the missing class.
; So only set this entry, if you really want to implement such a=20
; callback-function.
unserialize_callback_func=3D

; Whether to enable the ability to force arguments to be passed by =
reference
; at function call time.  This method is deprecated and is likely to be
; unsupported in future versions of PHP/Zend.  The encouraged method of
; specifying which arguments should be passed by reference is in the =
function
; declaration.  You're encouraged to try and turn this option Off and =
make
; sure your scripts work properly with it in order to ensure they will =
work
; with future versions of the language (you will receive a warning each =
time
; you use this feature, and the argument will be passed by value instead =
of by
; reference).
allow_call_time_pass_reference =3D On

; Safe Mode
;
safe_mode =3D Off

; By default, Safe Mode does a UID compare check when
; opening files. If you want to relax this to a GID compare,
; then turn on safe_mode_gid.
safe_mode_gid =3D Off

; When safe_mode is on, UID/GID checks are bypassed when
; including files from this directory and its subdirectories.
; (directory must also be in include_path or full path must
; be used when including)
safe_mode_include_dir =3D							=09

; When safe_mode is on, only executables located in the =
safe_mode_exec_dir
; will be allowed to be executed via the exec family of functions.
safe_mode_exec_dir =3D

; Setting certain environment variables may be a potential security =
breach.
; This directive contains a comma-delimited list of prefixes.  In Safe =
Mode,
; the user may only alter environment variables whose names begin with =
the
; prefixes supplied here.  By default, users will only be able to set
; environment variables that begin with PHP_ (e.g. PHP_FOO=3DBAR).
;
; Note:  If this directive is empty, PHP will let the user modify ANY
; environment variable!
safe_mode_allowed_env_vars =3D PHP_

; This directive contains a comma-delimited list of environment =
variables that
; the end user won't be able to change using putenv().  These variables =
will be
; protected even if safe_mode_allowed_env_vars is set to allow to change =
them.
safe_mode_protected_env_vars =3D LD_LIBRARY_PATH

; open_basedir, if set, limits all file operations to the defined =
directory
; and below.  This directive makes most sense if used in a per-directory
; or per-virtualhost web server configuration file. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
;open_basedir =3D

; This directive allows you to disable certain functions for security =
reasons.
; It receives a comma-delimited list of function names. This directive =
is
; *NOT* affected by whether Safe Mode is turned On or Off.
disable_functions =3D

; Colors for Syntax Highlighting mode.  Anything that's acceptable in
; <font color=3D"??????"> would work.
;highlight.string  =3D #DD0000
;highlight.comment =3D #FF9900
;highlight.keyword =3D #007700
;highlight.bg      =3D #FFFFFF
;highlight.default =3D #0000BB
;highlight.html    =3D #000000


;
; Misc
;
; Decides whether PHP may expose the fact that it is installed on the =
server
; (e.g. by adding its signature to the Web server header).  It is no =
security
; threat in any way, but it makes it possible to determine whether you =
use PHP
; on your server or not.
expose_php =3D On


;;;;;;;;;;;;;;;;;;;
; Resource Limits ;
;;;;;;;;;;;;;;;;;;;

max_execution_time =3D 30     ; Maximum execution time of each script, =
in seconds
max_input_time =3D 60	; Maximum amount of time each script may spend =
parsing request data
memory_limit =3D 8M      ; Maximum amount of memory a script may consume =
(8MB)

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Error handling and logging ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; error_reporting is a bit-field.  Or each number up to get desired =
error
; reporting level
; E_ALL             - All errors and warnings
; E_ERROR           - fatal run-time errors
; E_WARNING         - run-time warnings (non-fatal errors)
; E_PARSE           - compile-time parse errors
; E_NOTICE          - run-time notices (these are warnings which often =
result
;                     from a bug in your code, but it's possible that it =
was
;                     intentional (e.g., using an uninitialized variable =
and
;                     relying on the fact it's automatically initialized =
to an
;                     empty string)
; E_CORE_ERROR      - fatal errors that occur during PHP's initial =
startup
; E_CORE_WARNING    - warnings (non-fatal errors) that occur during =
PHP's
;                     initial startup
; E_COMPILE_ERROR   - fatal compile-time errors
; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
; E_USER_ERROR      - user-generated error message
; E_USER_WARNING    - user-generated warning message
; E_USER_NOTICE     - user-generated notice message
;
; Examples:
;
;   - Show all errors, except for notices
;
error_reporting =3D E_ALL & ~E_NOTICE
;
;   - Show only errors
;
;error_reporting =3D E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR
;
;   - Show all errors except for notices
;
;error_reporting  =3D E_ALL; display all errors, warnings and notices

; Print out errors (as a part of the output).  For production web sites,
; you're strongly encouraged to turn this feature off, and use error =
logging
; instead (see below).  Keeping display_errors enabled on a production =
web site
; may reveal security information to end users, such as file paths on =
your Web
; server, your database schema or other information.
display_errors =3D On

; Even when display_errors is on, errors that occur during PHP's startup
; sequence are not displayed.  It's strongly recommended to keep
; display_startup_errors off, except for when debugging.
display_startup_errors =3D Off

; Log errors into a log file (server-specific log, stderr, or error_log =
(below))
; As stated above, you're strongly advised to use error logging in place =
of
; error displaying on production web sites.
log_errors =3D Off

; Set maximum length of log_errors. In error_log information about the =
source is
; added. The default is 1024 and 0 allows to not apply any maximum =
length at all.
log_errors_max_len =3D 1024

; Do not log repeated messages. Repeated errors must occur in same file =
on same
; line until ignore_repeated_source is set true.
ignore_repeated_errors =3D Off

; Ignore source of message when ignoring repeated messages. When this =
setting=20
; is On you will not log errors with repeated messages from different =
files or
; sourcelines.
ignore_repeated_source =3D Off

; If this parameter is set to Off, then memory leaks will not be shown =
(on
; stdout or in the log). This has only effect in a debug compile, and if =

; error reporting includes E_WARNING in the allowed list
report_memleaks =3D On

; Store the last error/warning message in $php_errormsg (boolean).
track_errors =3D Off

; Disable the inclusion of HTML tags in error messages.
;html_errors =3D Off
 =20
; If html_errors is set On PHP produces clickable error messages that =
direct=20
; to a page describing the error or function causing the error in =
detail.
; You can download a copy of the PHP manual from =
http://www.php.net/docs.php=20
; and change docref_root to the base URL of your local copy including =
the
; leading '/'. You must also specify the file extension being used =
including=20
; the dot.
;docref_root =3D /phpmanual/
;docref_ext =3D .html
 =20
; String to output before an error message.
;error_prepend_string =3D "<font color=3Dff0000>"

; String to output after an error message.
;error_append_string =3D "</font>"

; Log errors to specified file.
;error_log =3D filename

; Log errors to syslog (Event Log on NT, not valid in Windows 95).
;error_log =3D syslog


;;;;;;;;;;;;;;;;;
; Data Handling ;
;;;;;;;;;;;;;;;;;
;
; Note - track_vars is ALWAYS enabled as of PHP 4.0.3

; The separator used in PHP generated URLs to separate arguments.
; Default is "&".=20
;arg_separator.output =3D "&amp;"

; List of separator(s) used by PHP to parse input URLs into variables.
; Default is "&".=20
; NOTE: Every character in this directive is considered as separator!
;arg_separator.input =3D ";&"

; This directive describes the order in which PHP registers GET, POST, =
Cookie,
; Environment and Built-in variables (G, P, C, E & S respectively, often
; referred to as EGPCS or GPC).  Registration is done from left to =
right, newer
; values override older values.
variables_order =3D "EGPCS"

; Whether or not to register the EGPCS variables as global variables.  =
You may
; want to turn this off if you don't want to clutter your scripts' =
global scope
; with user data.  This makes most sense when coupled with track_vars - =
in which
; case you can access all of the GPC variables through the =
$HTTP_*_VARS[],
; variables.
;
; You should do your best to write your scripts so that they do not =
require
; register_globals to be on;  Using form variables as globals can easily =
lead
; to possible security problems, if the code is not very well thought =
of.
register_globals =3D Off

; This directive tells PHP whether to declare the argv&argc variables =
(that
; would contain the GET information).  If you don't use these variables, =
you
; should turn it off for increased performance.
register_argc_argv =3D On

; Maximum size of POST data that PHP will accept.
post_max_size =3D 8M

; This directive is deprecated.  Use variables_order instead.
gpc_order =3D "GPC"

; Magic quotes
;

; Magic quotes for incoming GET/POST/Cookie data.
magic_quotes_gpc =3D On

; Magic quotes for runtime-generated data, e.g. data from SQL, from =
exec(), etc.
magic_quotes_runtime =3D Off   =20

; Use Sybase-style magic quotes (escape ' with '' instead of \').
magic_quotes_sybase =3D Off

; Automatically add files before or after any PHP document.
auto_prepend_file =3D
auto_append_file =3D

; As of 4.0b4, PHP always outputs a character encoding by default in
; the Content-type: header.  To disable sending of the charset, simply
; set it to be empty.
;
; PHP's built-in default is text/html
default_mimetype =3D "text/html"
;default_charset =3D "iso-8859-1"

; Always populate the $HTTP_RAW_POST_DATA variable.
;always_populate_raw_post_data =3D On

; Allow handling of WebDAV http requests within PHP scripts (eg.
; PROPFIND, PROPPATCH, MOVE, COPY, etc..)
; If you want to get the post data of those requests, you have to
; set always_populate_raw_post_data as well.
;allow_webdav_methods =3D On

;;;;;;;;;;;;;;;;;;;;;;;;;
; Paths and Directories ;
;;;;;;;;;;;;;;;;;;;;;;;;;

; UNIX: "/path1:/path2" =20
;include_path =3D ".:/php/includes"
;
; Windows: "\path1;\path2"
;include_path =3D ".;c:\php\includes"

; The root of the PHP pages, used only if nonempty.
; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
; if you are running php as a CGI under any web server (other than IIS)
; see documentation for security issues.  The alternate is to use the
; cgi.force_redirect configuration below
doc_root =3D

; The directory under which PHP opens the script using /~username used =
only
; if nonempty.
user_dir =3D

; Directory in which the loadable extensions (modules) reside.
extension_dir =3D ./extensions

; Whether or not to enable the dl() function.  The dl() function does =
NOT work
; properly in multithreaded servers, such as IIS or Zeus, and is =
automatically
; disabled on them.
enable_dl =3D On

; cgi.force_redirect is necessary to provide security running PHP as a =
CGI under
; most web servers.  Left undefined, PHP turns this on by default.  You =
can
; turn it off here AT YOUR OWN RISK
; **You CAN safely turn this off for IIS, in fact, you MUST.**
; cgi.force_redirect =3D 1
cgi.force_redirect =3D 0

; if cgi.force_redirect is turned on, and you are not running under =
Apache or Netscape=20
; (iPlanet) web servers, you MAY need to set an environment variable =
name that PHP
; will look for to know it is OK to continue execution.  Setting this =
variable MAY
; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
; cgi.redirect_status_env =3D ;

; FastCGI under IIS (on WINNT based OS) supports the ability to =
impersonate
; security tokens of the calling client.  This allows IIS to define the
; security context that the request runs under.  mod_fastcgi under =
Apache
; does not currently support this feature (03/17/2002)
; Set to 1 if running under IIS.  Default is zero.
; fastcgi.impersonate =3D 1;

; cgi.rfc2616_headers configuration option tells PHP what type of =
headers to
; use when sending HTTP response code. If it's set 0 PHP sends Status: =
header that
; is supported by Apache. When this option is set to 1 PHP will send
; RFC2616 compliant header.
; Set to 1 if running under IIS.  Default is zero.
;cgi.rfc2616_headers =3D 0=20
=20

;;;;;;;;;;;;;;;;
; File Uploads ;
;;;;;;;;;;;;;;;;

; Whether to allow HTTP file uploads.
file_uploads =3D On

; Temporary directory for HTTP uploaded files (will use system default =
if not
; specified).
upload_tmp_dir =3D C:\PHP\uploadtemp  ; temporary directory for HTTP =
uploaded files (will use system default if not specified)

; Maximum allowed size for uploaded files.
upload_max_filesize =3D 2M


;;;;;;;;;;;;;;;;;;
; Fopen wrappers ;
;;;;;;;;;;;;;;;;;;

; Whether to allow the treatment of URLs (like http:// or ftp://) as =
files.
allow_url_fopen =3D On

; Define the anonymous ftp password (your email address)
;from=3D"john@doe.com"

; Define the User-Agent string
; user_agent=3D"PHP"

; Default timeout for socket based streams (seconds)
default_socket_timeout =3D 60

; If your scripts have to deal with files from Macintosh systems,
; or you are running on a Mac and need to deal with files from
; unix or win32 systems, setting this flag will cause PHP to
; automatically detect the EOL character in those files so that
; fgets() and file() will work regardless of the source of the file.
; auto_detect_line_endings =3D Off


;;;;;;;;;;;;;;;;;;;;;;
; Dynamic Extensions ;
;;;;;;;;;;;;;;;;;;;;;;
;
; If you wish to have an extension loaded automatically, use the =
following
; syntax:
;
;   extension=3Dmodulename.extension
;
; For example, on Windows:
;
;   extension=3Dmsql.dll
;
; ... or under UNIX:
;
;   extension=3Dmsql.so
;
; Note that it should be the name of the module only; no directory =
information=20
; needs to go here.  Specify the location of the extension with the
; extension_dir directive above.


;Windows Extensions
;Note that MySQL and ODBC support is now built in, so no dll is needed =
for it.
;
;extension=3Dphp_bz2.dll
;extension=3Dphp_cpdf.dll
;extension=3Dphp_crack.dll
;extension=3Dphp_curl.dll
;extension=3Dphp_db.dll
;extension=3Dphp_dba.dll
extension=3Dphp_dbase.dll
;extension=3Dphp_dbx.dll
;extension=3Dphp_domxml.dll
;extension=3Dphp_exif.dll
;extension=3Dphp_fbsql.dll
;extension=3Dphp_fdf.dll
;extension=3Dphp_filepro.dll
extension=3Dphp_gd.dll
;extension=3Dphp_gd2.dll
;extension=3Dphp_gettext.dll
;extension=3Dphp_hyperwave.dll
;extension=3Dphp_iconv.dll
;extension=3Dphp_ifx.dll
;extension=3Dphp_iisfunc.dll
;extension=3Dphp_imap.dll
;extension=3Dphp_interbase.dll
;extension=3Dphp_java.dll
;extension=3Dphp_ldap.dll
;extension=3Dphp_mapscript.dll
;extension=3Dphp_mbstring.dll
;extension=3Dphp_mcrypt.dll
;extension=3Dphp_mhash.dll
;extension=3Dphp_mime_magic.dll
;extension=3Dphp_ming.dll
;extension=3Dphp_mssql.dll
;extension=3Dphp_msql.dll
;extension=3Dphp_oci8.dll
;extension=3Dphp_openssl.dll
;extension=3Dphp_oracle.dll
;extension=3Dphp_pdf.dll
;extension=3Dphp_pgsql.dll
;extension=3Dphp_printer.dll
;extension=3Dphp_shmop.dll
;extension=3Dphp_snmp.dll
;extension=3Dphp_sockets.dll
;extension=3Dphp_sybase_ct.dll
;extension=3Dphp_w32api.dll
;extension=3Dphp_xmlrpc.dll
;extension=3Dphp_xslt.dll
;extension=3Dphp_yaz.dll
;extension=3Dphp_zip.dll


;;;;;;;;;;;;;;;;;;;
; Module Settings ;
;;;;;;;;;;;;;;;;;;;

[Syslog]
; Whether or not to define the various syslog variables (e.g. $LOG_PID,
; $LOG_CRON, etc.).  Turning it off is a good idea performance-wise.  In
; runtime, you can define these variables by calling =
define_syslog_variables().
define_syslog_variables  =3D Off

[mail function]
; For Win32 only.
SMTP =3D localhost ; for Win32 only

; For Win32 only.
sendmail_from =3D me@localhost.com ; for Win32 only

; For Unix only.  You may supply arguments as well (default: "sendmail =
-t -i").
;sendmail_path =3D

[Java]
;java.class.path =3D .\php_java.jar
;java.home =3D c:\jdk
;java.library =3D c:\jdk\jre\bin\hotspot\jvm.dll=20
;java.library.path =3D .\

[SQL]
sql.safe_mode =3D Off

[ODBC]
;odbc.default_db    =3D  Not yet implemented
;odbc.default_user  =3D  Not yet implemented
;odbc.default_pw    =3D  Not yet implemented

; Allow or prevent persistent links.
odbc.allow_persistent =3D On

; Check that a connection is still valid before reuse.
odbc.check_persistent =3D On

; Maximum number of persistent links.  -1 means no limit.
odbc.max_persistent =3D -1

; Maximum number of links (persistent + non-persistent).  -1 means no =
limit.
odbc.max_links =3D -1 =20

; Handling of LONG fields.  Returns number of bytes to variables.  0 =
means
; passthru.
odbc.defaultlrl =3D 4096 =20

; Handling of binary data.  0 means passthru, 1 return as is, 2 convert =
to char.
; See the documentation on odbc_binmode and odbc_longreadlen for an =
explanation
; of uodbc.defaultlrl and uodbc.defaultbinmode
odbc.defaultbinmode =3D 1 =20

[MySQL]
; Allow or prevent persistent links.
mysql.allow_persistent =3D On

; Maximum number of persistent links.  -1 means no limit.
mysql.max_persistent =3D -1

; Maximum number of links (persistent + non-persistent).  -1 means no =
limit.
mysql.max_links =3D -1

; Default port number for mysql_connect().  If unset, mysql_connect() =
will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order).  Win32 will =
only look
; at MYSQL_PORT.
mysql.default_port =3D

; Default socket name for local MySQL connects.  If empty, uses the =
built-in
; MySQL defaults.
mysql.default_socket =3D

; Default host for mysql_connect() (doesn't apply in safe mode).
mysql.default_host =3D

; Default user for mysql_connect() (doesn't apply in safe mode).
mysql.default_user =3D

; Default password for mysql_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this =
file.
; *Any* user with PHP access can run 'echo =
get_cfg_var("mysql.default_password")
; and reveal this password!  And of course, any users with read access =
to this
; file will be able to reveal the password as well.
mysql.default_password =3D

; Maximum time (in secondes) for connect timeout. -1 means no limimt
mysql.connect_timeout =3D -1

; Trace mode. When trace_mode is active (=3DOn), warnings for =
table/index scans and
; SQL-Erros will be displayed.
mysql.trace_mode =3D Off

[mSQL]
; Allow or prevent persistent links.
msql.allow_persistent =3D On

; Maximum number of persistent links.  -1 means no limit.
msql.max_persistent =3D -1

; Maximum number of links (persistent+non persistent).  -1 means no =
limit.
msql.max_links =3D -1

[PostgresSQL]
; Allow or prevent persistent links.
pgsql.allow_persistent =3D On

; Detect broken persistent links always with pg_pconnect(). Need a =
little overhead.
pgsql.auto_reset_persistent =3D Off=20

; Maximum number of persistent links.  -1 means no limit.
pgsql.max_persistent =3D -1

; Maximum number of links (persistent+non persistent).  -1 means no =
limit.
pgsql.max_links =3D -1

; Ignore PostgreSQL backends Notice message or not.
pgsql.ignore_notice =3D 0

; Log PostgreSQL backends Noitce message or not.
; Unless pgsql.ignore_notice=3D0, module cannot log notice message.
pgsql.log_notice =3D 0

[Sybase]
; Allow or prevent persistent links.
sybase.allow_persistent =3D On

; Maximum number of persistent links.  -1 means no limit.
sybase.max_persistent =3D -1

; Maximum number of links (persistent + non-persistent).  -1 means no =
limit.
sybase.max_links =3D -1

;sybase.interface_file =3D "/usr/sybase/interfaces"

; Minimum error severity to display.
sybase.min_error_severity =3D 10

; Minimum message severity to display.
sybase.min_message_severity =3D 10

; Compatability mode with old versions of PHP 3.0.
; If on, this will cause PHP to automatically assign types to results =
according
; to their Sybase type, instead of treating them all as strings.  This
; compatability mode will probably not stay around forever, so try =
applying
; whatever necessary changes to your code, and turn it off.
sybase.compatability_mode =3D Off

[Sybase-CT]
; Allow or prevent persistent links.
sybct.allow_persistent =3D On

; Maximum number of persistent links.  -1 means no limit.
sybct.max_persistent =3D -1

; Maximum number of links (persistent + non-persistent).  -1 means no =
limit.
sybct.max_links =3D -1

; Minimum server message severity to display.
sybct.min_server_severity =3D 10

; Minimum client message severity to display.
sybct.min_client_severity =3D 10

[dbx]
; returned column names can be converted for compatibility reasons
; possible values for dbx.colnames_case are
; "unchanged" (default, if not set)
; "lowercase"
; "uppercase"
; the recommended default is either upper- or lowercase, but
; unchanged is currently set for backwards compatibility
dbx.colnames_case =3D "unchanged"

[bcmath]
; Number of decimal digits for all bcmath functions.
bcmath.scale =3D 0

[browscap]
;browscap =3D extra/browscap.ini

[Informix]
; Default host for ifx_connect() (doesn't apply in safe mode).
ifx.default_host =3D

; Default user for ifx_connect() (doesn't apply in safe mode).
ifx.default_user =3D

; Default password for ifx_connect() (doesn't apply in safe mode).
ifx.default_password =3D

; Allow or prevent persistent links.
ifx.allow_persistent =3D On

; Maximum number of persistent links.  -1 means no limit.
ifx.max_persistent =3D -1

; Maximum number of links (persistent + non-persistent).  -1 means no =
limit.
ifx.max_links =3D -1

; If on, select statements return the contents of a text blob instead of =
its id.
ifx.textasvarchar =3D 0

; If on, select statements return the contents of a byte blob instead of =
its id.
ifx.byteasvarchar =3D 0

; Trailing blanks are stripped from fixed-length char columns.  May help =
the
; life of Informix SE users.
ifx.charasvarchar =3D 0

; If on, the contents of text and byte blobs are dumped to a file =
instead of
; keeping them in memory.
ifx.blobinfile =3D 0

; NULL's are returned as empty strings, unless this is set to 1.  In =
that case,
; NULL's are returned as string 'NULL'.
ifx.nullformat =3D 0

[Session]
; Handler used to store/retrieve data.
session.save_handler =3D files

; Argument passed to save_handler.  In the case of files, this is the =
path
; where data files are stored. Note: Windows users have to change this=20
; variable in order to use PHP's session functions.
; As of PHP 4.0.1, you can define the path as:
;     session.save_path =3D "N;/path"
; where N is an integer.  Instead of storing all the session files in=20
; /path, what this will do is use subdirectories N-levels deep, and=20
; store the session data in those directories.  This is useful if you=20
; or your OS have problems with lots of files in one directory, and is=20
; a more efficient layout for servers that handle lots of sessions.
; NOTE 1: PHP will not create this directory structure automatically.
;         You can use the script in the ext/session dir for that =
purpose.
; NOTE 2: See the section on garbage collection below if you choose to
;         use subdirectories for session storage
session.save_path =3D C:\PHP\sessiondata    ; argument passed to =
save_handler

; Whether to use cookies.
session.use_cookies =3D 1

; This option enables administrators to make their users invulnerable to
; attacks which involve passing session ids in URLs; defaults to 0.
; session.use_only_cookies =3D 1

; Name of the session (used as cookie name).
session.name =3D PHPSESSID

; Initialize session on request startup.
session.auto_start =3D 0

; Lifetime in seconds of cookie or, if 0, until browser is restarted.
session.cookie_lifetime =3D 0

; The path for which the cookie is valid.
session.cookie_path =3D /

; The domain for which the cookie is valid.
session.cookie_domain =3D

; Handler used to serialize data.  php is the standard serializer of =
PHP.
session.serialize_handler =3D php

; Define the probability that the 'garbage collection' process is =
started
; on every session initialization.
; The probability is calculated by using gc_probability/gc_dividend,
; e.g. 1/100 means 1%.

session.gc_probability =3D 1
session.gc_dividend    =3D 100

; After this number of seconds, stored data will be seen as 'garbage' =
and
; cleaned up by the garbage collection process.
; WARNING: Your filesystem must store access times.  Windows FAT does
;          not.  So, see session_set_save_handler() and write your own
;          session handler with a different mechanism for cleaning up =
sessions.
session.gc_maxlifetime =3D 1440

; NOTE: If you are using the subdirectory option for storing session =
files
;       (see session.save_path above), then garbage collection does =
*not*
;       happen automatically.  You will need to do your own garbage=20
;       collection through a shell script, cron entry, or some other =
method.=20
;       For example, the following script would is the equivalent of
;       setting session.gc_maxlifetime to 1440 (1440 seconds =3D 24 =
minutes):
;          cd /path/to/sessions; find -cmin +24 | xargs rm

; PHP 4.2 and less have an undocumented feature/bug that allows you to
; to initialize a session variable in the global scope, albeit =
register_globals
; is disabled.  PHP 4.3 and later will warn you, if this feature is =
used.
; You can disable the feature and the warning seperately. At this time,
; the warning is only displayed, if bug_compat_42 is enabled.

session.bug_compat_42 =3D 1
session.bug_compat_warn =3D 1

; Check HTTP Referer to invalidate externally stored URLs containing =
ids.
; HTTP_REFERER has to contain this substring for the session to be
; considered as valid.
session.referer_check =3D

; How many bytes to read from the file.
session.entropy_length =3D 0

; Specified here to create the session id.
session.entropy_file =3D

;session.entropy_length =3D 16

;session.entropy_file =3D /dev/urandom

; Set to {nocache,private,public,} to determine HTTP caching aspects
; or leave this empty to avoid sending anti-caching headers.
session.cache_limiter =3D nocache

; Document expires after n minutes.
session.cache_expire =3D 180

; trans sid support is disabled by default.
; Use of trans sid may risk your users security.=20
; Use this option with caution.
; - User may send URL contains active session ID
;   to other person via. email/irc/etc.
; - URL that contains active session ID may be stored
;   in publically accessible computer.
; - User may access your site with the same session ID
;   always using URL stored in browser's history or bookmarks.
session.use_trans_sid =3D 0

; The URL rewriter will look for URLs in a defined set of HTML tags.
; form/fieldset are special; if you include them here, the rewriter will
; add a hidden <input> field with the info which is otherwise appended
; to URLs.  If you want XHTML conformity, remove the form entry.
; Note that all valid entries require a "=3D", even if no value follows.
url_rewriter.tags =3D =
"a=3Dhref,area=3Dhref,frame=3Dsrc,input=3Dsrc,form=3D,fieldset=3D"

[MSSQL]
; Allow or prevent persistent links.
mssql.allow_persistent =3D On

; Maximum number of persistent links.  -1 means no limit.
mssql.max_persistent =3D -1

; Maximum number of links (persistent+non persistent).  -1 means no =
limit.
mssql.max_links =3D -1

; Minimum error severity to display.
mssql.min_error_severity =3D 10

; Minimum message severity to display.
mssql.min_message_severity =3D 10

; Compatability mode with old versions of PHP 3.0.
mssql.compatability_mode =3D Off

; Valid range 0 - 2147483647.  Default =3D 4096.
;mssql.textlimit =3D 4096

; Valid range 0 - 2147483647.  Default =3D 4096.
;mssql.textsize =3D 4096

; Limits the number of records in each batch.  0 =3D all records in one =
batch.
;mssql.batchsize =3D 0

; Use NT authentication when connecting to the server
mssql.secure_connection =3D Off

; Specify max number of processes. Default =3D 25
;mssql.max_procs =3D 25

[Assertion]
; Assert(expr); active by default.
;assert.active =3D On

; Issue a PHP warning for each failed assertion.
;assert.warning =3D On

; Don't bail out by default.
;assert.bail =3D Off

; User-function to be called if an assertion fails.
;assert.callback =3D 0

; Eval the expression with current error_reporting().  Set to true if =
you want
; error_reporting(0) around the eval().
;assert.quiet_eval =3D 0

[Ingres II]
; Allow or prevent persistent links.
ingres.allow_persistent =3D On

; Maximum number of persistent links.  -1 means no limit.
ingres.max_persistent =3D -1

; Maximum number of links, including persistents.  -1 means no limit.
ingres.max_links =3D -1

; Default database (format: [node_id::]dbname[/srv_class]).
ingres.default_database =3D

; Default user.
ingres.default_user =3D

; Default password.
ingres.default_password =3D

[Verisign Payflow Pro]
; Default Payflow Pro server.
pfpro.defaulthost =3D "test-payflow.verisign.com"

; Default port to connect to.
pfpro.defaultport =3D 443

; Default timeout in seconds.
pfpro.defaulttimeout =3D 30

; Default proxy IP address (if required).
;pfpro.proxyaddress =3D

; Default proxy port.
;pfpro.proxyport =3D

; Default proxy logon.
;pfpro.proxylogon =3D

; Default proxy password.
;pfpro.proxypassword =3D

[Sockets]
; Use the system read() function instead of the php_read() wrapper.
sockets.use_system_read =3D On

[com]
; path to a file containing GUIDs, IIDs or filenames of files with =
TypeLibs
;com.typelib_file =3D=20
; allow Distributed-COM calls
;com.allow_dcom =3D true
; autoregister constants of a components typlib on com_load()
;com.autoregister_typelib =3D true
; register constants casesensitive
;com.autoregister_casesensitive =3D false
; show warnings on duplicate constat registrations
;com.autoregister_verbose =3D true

[Printer]
;printer.default_printer =3D ""

[mbstring]
; language for internal character representation.
;mbstring.language =3D Japanese

; internal/script encoding.
; Some encoding cannot work as internal encoding.
; (e.g. SJIS, BIG5, ISO-2022-*)
;mbstring.internal_encoding =3D EUC-JP

; http input encoding.
;mbstring.http_input =3D auto

; http output encoding. mb_output_handler must be
; registered as output buffer to function
;mbstring.http_output =3D SJIS

; enable automatic encoding translation accoding to=20
; mbstring.internal_encoding setting. Input chars are
; converted to internal encoding by setting this to On.
; Note: Do _not_ use automatic encoding translation for
;       portable libs/applications.
;mbstring.encoding_translation =3D Off

; automatic encoding detection order.
; auto means=20
;mbstring.detect_order =3D auto

; substitute_character used when character cannot be converted
; one from another
;mbstring.substitute_character =3D none;

; overload(replace) single byte functions by mbstring functions.
; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
; etc. Possible values are 0,1,2,4 or combination of them.
; For example, 7 for overload everything.
; 0: No overload
; 1: Overload mail() function
; 2: Overload str*() functions
; 4: Overload ereg*() functions
;mbstring.func_overload =3D 0

[FrontBase]
;fbsql.allow_persistent =3D On
;fbsql.autocommit =3D On
;fbsql.default_database =3D=20
;fbsql.default_database_password =3D
;fbsql.default_host =3D
;fbsql.default_password =3D
;fbsql.default_user =3D "_SYSTEM"
;fbsql.generate_warnings =3D Off
;fbsql.max_connections =3D 128
;fbsql.max_links =3D 128
;fbsql.max_persistent =3D -1
;fbsql.max_results =3D 128
;fbsql.batchSize =3D 1000

[Crack]
; Modify the setting below to match the directory location of the =
cracklib
; dictionary files.  Include the base filename, but not the file =
extension.
; crack.default_dictionary =3D "c:\php\lib\cracklib_dict"

[exif]
; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as =
JIS.=20
; With mbstring support this will automatically be converted into the =
encoding
; given by corresponding encode setting. When empty =
mbstring.internal_encoding=20
; is used. For the decode settings you can distinguish between motorola =
and=20
; intel byte order. A decode setting cannot be empty.
;exif.encode_unicode =3D ISO-8859-15
;exif.decode_unicode_motorola =3D UCS-2BE
;exif.decode_unicode_intel    =3D UCS-2LE
;exif.encode_jis =3D=20
;exif.decode_jis_motorola =3D JIS
;exif.decode_jis_intel    =3D JIS

; Local Variables:
; tab-width: 4
; End:

------=_NextPart_000_004B_01C2B2A4.D25EBD00--



This archive was generated by Pipermail.