[maplab-users] RE: Maplab-users digest, Vol 1 #162 - 8 msgs

Tue, 11 Mar 2003 21:48:39 +1100

Hi Sacha,

I was having Scott's problem with the previous installation but after I
installed rc4 somehow it is fixed...  I have no idea what was wrong with the
path and url settings but they were looking fine to me as installation
manual directs...

I do have another problem though,
When I check installation information  it says that gif is not supported!
And when I try to browse a map I get php error

>>
 Fatal error: MapServer Error in msImageLoadGD(): Unable to load GIF
reference image. in C:\MyGis\maplab\htdocs\mapbrowser\map.php on line 693
>>

how can I fix this ???

Would you please help me???  Thanks.

PS: I found the section about xml installation settings confusing, not very
clear for an important  setup that cause that much problems in the maplab!

Kind regards,

Oldes Çökdü
oldes@occons.com <mailto:oldes@occons.com>                   www.occons.com
<http://www.occons.com>
Mob:   +(61) 417 139 382 (AU)        +(90) 536 816 1407 (TR)
LEGAL DISCLAIMER: The information in this message is confidential and may be
legally privileged. It is intended solely for the addressee.  Access to this
message by anyone else is unauthorised. If you are not the intended
recipient, any disclosure, copying, or distribution of the message, or any
action or omission taken by you in reliance on it, is prohibited and may be
unlawful. Please immediately contact the sender if you have receive this
message in error. Thank you.

-----Original Message-----
From: maplab-users-admin@dmsolutions.ca
[mailto:maplab-users-admin@dmsolutions.ca]On Behalf Of
maplab-users-request@dmsolutions.ca
Sent: Wednesday, 12 March 2003 4:00 AM
To: maplab-users@dmsolutions.ca
Subject: Maplab-users digest, Vol 1 #162 - 8 msgs

Send Maplab-users mailing list submissions to
	maplab-users@dmsolutions.ca

To subscribe or unsubscribe via the World Wide Web, visit
	http://lists.dmsolutions.ca/mailman/listinfo/maplab-users
or, via email, send a message with subject or body 'help' to
	maplab-users-request@dmsolutions.ca

You can reach the person managing the list at
	maplab-users-admin@dmsolutions.ca

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Maplab-users digest..."

Today's Topics:

   1. Installation of MapLab 2.0rc4 - strange behaviour (Tweedy, Scott)
   2. Re: Strange behaviors (Sacha Fournier)
   3. Re: Installation of MapLab 2.0rc4 - strange behaviour (Sacha Fournier)
   4. RE: Installation of MapLab 2.0rc4 - strange behavi
       our (Tweedy, Scott)
   5. Re: Installation of MapLab 2.0rc4 - strange behavi
       our (Sacha Fournier)
   6. fwd: mapFactory components (Fred Warnock)

--__--__--

Message: 1
From: "Tweedy, Scott" <sctweedy@NRCan.gc.ca>
To: "MapLab Users (E-mail)" <maplab-users@dmsolutions.ca>
Date: Mon, 10 Mar 2003 15:26:01 -0500
Subject: [maplab-users] Installation of MapLab 2.0rc4 - strange behaviour

I installed MapLab 2.0rc4 and I started getting seeing some weird behaviour.

I'm currently using Windows 2000, IIS 5.0, PHP 4.3.1, MapServer 3.6.4 (or
3.7, I tried both).

At first when I loaded MapLab I saw the following error message.

Warning: mkdir(c:/winnt/temp/sess_3e6cece6ed637) [function.mkdir]: File
exists in D:\maplab\htdocs\common\session\session.php on line 141

The error message went away when I changed the session.auto_start value in
my PHP.ini file (which was set to 0 by default) to 1.

Then when I loaded MapLab in IE6.0 and tried to open a file the file browser
opened in the wrong directory.  It's opening within the MapLab file
structure in the maplab/htdocs/common/ folder instead of the directory that
I defined in the XML file.

How can I get MapLab to start browsing the correct directory?

Thanks in advance,
st

--__--__--

Message: 2
Date: Mon, 10 Mar 2003 16:12:43 -0500
From: Sacha Fournier <sfournier@dmsolutions.ca>
Reply-To: sfournier@dmsolutions.ca
Organization: DM Solutions Group
To: galassoa@tin.it
CC: maplab-users@dmsolutions.ca
Subject: Re: [maplab-users] Strange behaviors

Hi Alessandro,

We're currently looking at this problem. Hopefully a fix will be
available soon.

galassoa@tin.it wrote:
> Hi everyone...
> i'm starting to work with MapLab 2.0rc4 on Windows2000.
> After installation of PHP4.3.1, mapserver 3.6.4 and maplab2.0rc4 i've
noted
> a strange behavior of MapEdit.
> I've opened an existing map and clicked on "Preview". Then the first view
> appears. But clicking again on zooming produce a blank image.
> Another thing is that in the legend don't appear the list of the available
> layer.
>
> May someone help me to understand where is the problem ?
>
> Thanks in advance,
> Alessandro.
>
>
> _______________________________________________
> Maplab-users mailing list
> Maplab-users@dmsolutions.ca
> http://lists.dmsolutions.ca/mailman/listinfo/maplab-users
>

--
Sacha Fournier
Applications Developer
DM Solutions Group
sfournier@dmsolutions.ca
tel: 418.696.5056
fax: 418.696.5056

www.dmsolutions.ca

--__--__--

Message: 3
Date: Mon, 10 Mar 2003 16:19:13 -0500
From: Sacha Fournier <sfournier@dmsolutions.ca>
Reply-To: sfournier@dmsolutions.ca
Organization: DM Solutions Group
To: "Tweedy, Scott" <sctweedy@nrcan.gc.ca>
CC: "MapLab Users (E-mail)" <maplab-users@dmsolutions.ca>
Subject: Re: [maplab-users] Installation of MapLab 2.0rc4 - strange
behaviour

Hi Tweedy,

Tweedy, Scott wrote:
> I installed MapLab 2.0rc4 and I started getting seeing some weird
behaviour.
>
> I'm currently using Windows 2000, IIS 5.0, PHP 4.3.1, MapServer 3.6.4 (or
> 3.7, I tried both).
>
> At first when I loaded MapLab I saw the following error message.
>
> Warning: mkdir(c:/winnt/temp/sess_3e6cece6ed637) [function.mkdir]: File
> exists in D:\maplab\htdocs\common\session\session.php on line 141
>
> The error message went away when I changed the session.auto_start value in
> my PHP.ini file (which was set to 0 by default) to 1.

Investigating.

>
> Then when I loaded MapLab in IE6.0 and tried to open a file the file
browser
> opened in the wrong directory.  It's opening within the MapLab file
> structure in the maplab/htdocs/common/ folder instead of the directory
that
> I defined in the XML file.
>
> How can I get MapLab to start browsing the correct directory?
>

This happen when the path specify in configuration file is not an
absolute path or a valid path. Can you double check those values please,
I'll take a look at the PHP code to make sure that everything is ok though.

> Thanks in advance,
> st
> _______________________________________________
> Maplab-users mailing list
> Maplab-users@dmsolutions.ca
> http://lists.dmsolutions.ca/mailman/listinfo/maplab-users
>

--
Sacha Fournier
Applications Developer
DM Solutions Group
sfournier@dmsolutions.ca
tel: 418.696.5056
fax: 418.696.5056

www.dmsolutions.ca

--__--__--

Message: 4
From: "Tweedy, Scott" <sctweedy@NRCan.gc.ca>
To: "'sfournier@dmsolutions.ca'" <sfournier@dmsolutions.ca>
Cc: "MapLab Users (E-mail)" <maplab-users@dmsolutions.ca>
Subject: RE: [maplab-users] Installation of MapLab 2.0rc4 - strange behavi
	our
Date: Tue, 11 Mar 2003 08:34:34 -0500

Yeah, my file_browswer_root value is an absolute path to an existing
directory.  I've checked the spelling of the folder name and it's correct.
I've also tried using the folder name with and without a trailing slash.
Each time I get the same result, the file browsing starts in the /common/
folder.

I'm using IE 6.0.26 when this behaviour is seen.

Thanks again,
st

-----Original Message-----
From: Sacha Fournier [mailto:sfournier@dmsolutions.ca]
Sent: Monday, March 10, 2003 4:19 PM
To: Tweedy, Scott
Cc: MapLab Users (E-mail)
Subject: Re: [maplab-users] Installation of MapLab 2.0rc4 - strange
behaviour

Hi Tweedy,

Tweedy, Scott wrote:
> I installed MapLab 2.0rc4 and I started getting seeing some weird
behaviour.
>
> I'm currently using Windows 2000, IIS 5.0, PHP 4.3.1, MapServer 3.6.4 (or
> 3.7, I tried both).
>
> At first when I loaded MapLab I saw the following error message.
>
> Warning: mkdir(c:/winnt/temp/sess_3e6cece6ed637) [function.mkdir]: File
> exists in D:\maplab\htdocs\common\session\session.php on line 141
>
> The error message went away when I changed the session.auto_start value in
> my PHP.ini file (which was set to 0 by default) to 1.

Investigating.

>
> Then when I loaded MapLab in IE6.0 and tried to open a file the file
browser
> opened in the wrong directory.  It's opening within the MapLab file
> structure in the maplab/htdocs/common/ folder instead of the directory
that
> I defined in the XML file.
>
> How can I get MapLab to start browsing the correct directory?
>

This happen when the path specify in configuration file is not an
absolute path or a valid path. Can you double check those values please,
I'll take a look at the PHP code to make sure that everything is ok though.

> Thanks in advance,
> st
> _______________________________________________
> Maplab-users mailing list
> Maplab-users@dmsolutions.ca
> http://lists.dmsolutions.ca/mailman/listinfo/maplab-users
>

--
Sacha Fournier
Applications Developer
DM Solutions Group
sfournier@dmsolutions.ca
tel: 418.696.5056
fax: 418.696.5056

www.dmsolutions.ca

--__--__--

Message: 5
Date: Tue, 11 Mar 2003 11:36:42 -0500
From: Sacha Fournier <sfournier@dmsolutions.ca>
Reply-To: sfournier@dmsolutions.ca
Organization: DM Solutions Group
To: "Tweedy, Scott" <sctweedy@NRCan.gc.ca>
CC: "MapLab Users (E-mail)" <maplab-users@dmsolutions.ca>
Subject: Re: [maplab-users] Installation of MapLab 2.0rc4 - strange behavi
 our

Hi Scott,

I've take a look at the code and tried to reproduce the problem without
success. I'm still investigating. In the mean time can you try to use an
other version of PHP (4.2 or 4.3.2dev). I know that there was some bugs
with PHP4.3.1 as a CGI that was fixed in current dev version.

Regards,

Tweedy, Scott wrote:
> Yeah, my file_browswer_root value is an absolute path to an existing
> directory.  I've checked the spelling of the folder name and it's correct.
> I've also tried using the folder name with and without a trailing slash.
> Each time I get the same result, the file browsing starts in the /common/
> folder.
>
> I'm using IE 6.0.26 when this behaviour is seen.
>
> Thanks again,
> st
>
> -----Original Message-----
> From: Sacha Fournier [mailto:sfournier@dmsolutions.ca]
> Sent: Monday, March 10, 2003 4:19 PM
> To: Tweedy, Scott
> Cc: MapLab Users (E-mail)
> Subject: Re: [maplab-users] Installation of MapLab 2.0rc4 - strange
> behaviour
>
>
> Hi Tweedy,
>
>
> Tweedy, Scott wrote:
>
>>I installed MapLab 2.0rc4 and I started getting seeing some weird
>
> behaviour.
>
>>I'm currently using Windows 2000, IIS 5.0, PHP 4.3.1, MapServer 3.6.4 (or
>>3.7, I tried both).
>>
>>At first when I loaded MapLab I saw the following error message.
>>
>>Warning: mkdir(c:/winnt/temp/sess_3e6cece6ed637) [function.mkdir]: File
>>exists in D:\maplab\htdocs\common\session\session.php on line 141
>>
>>The error message went away when I changed the session.auto_start value in
>>my PHP.ini file (which was set to 0 by default) to 1.
>
>
> Investigating.
>
>
>>Then when I loaded MapLab in IE6.0 and tried to open a file the file
>
> browser
>
>>opened in the wrong directory.  It's opening within the MapLab file
>>structure in the maplab/htdocs/common/ folder instead of the directory
>
> that
>
>>I defined in the XML file.
>>
>>How can I get MapLab to start browsing the correct directory?
>>
>
>
> This happen when the path specify in configuration file is not an
> absolute path or a valid path. Can you double check those values please,
> I'll take a look at the PHP code to make sure that everything is ok
though.
>
>
>>Thanks in advance,
>>st
>>_______________________________________________
>>Maplab-users mailing list
>>Maplab-users@dmsolutions.ca
>>http://lists.dmsolutions.ca/mailman/listinfo/maplab-users
>>
>
>

--
Sacha Fournier
Applications Developer
DM Solutions Group
sfournier@dmsolutions.ca
tel: 418.696.5056
fax: 418.696.5056

www.dmsolutions.ca

--__--__--

Message: 6
Date: Tue, 11 Mar 2003 11:43:15 -0500
From: Fred Warnock <warnock@dmsolutions.ca>
Organization: DM Solutions Group Inc.
To: Maplab-users <Maplab-users@dmsolutions.ca>
Subject: [maplab-users] fwd: mapFactory components

forwarding Chris's query to you all...

"I'm not sure whether this is better addressed to you or the group but
here goes."

"Is there a way of separating the components of a Maplab app. I'm
looking to put the keymap, scalebar and mainmap into different cells of
an html table. So far I'v managed to jam the whole Mapfactory app into
one html table cell."

"Mapfactory creates a single .php include that contains the guts of the
app. Hopefully, you know of a way of doing this without mangling the
hell out of the .php file."

"Does this make any sense or should I elaborate?"

"Cheers,
Chris"

--__--__--

_______________________________________________
Maplab-users mailing list
Maplab-users@dmsolutions.ca
http://lists.dmsolutions.ca/mailman/listinfo/maplab-users

End of Maplab-users Digest