 |
||||
|
||||
[maplab-users] RE: Maplab-users digest, Vol 1 #162 - 8 msgsSacha Fournier sfournier@dmsolutions.caTue, 11 Mar 2003 15:07:51 -0500
|
||||
Hi Oldes, See comments below. Oldes Cokdu wrote: > Hi Sacha, > > I was having Scott's problem with the previous installation but after I > installed rc4 somehow it is fixed... I have no idea what was wrong with the > path and url settings but they were looking fine to me as installation > manual directs... Great :) > > I do have another problem though, > When I check installation information it says that gif is not supported! > And when I try to browse a map I get php error > > > Fatal error: MapServer Error in msImageLoadGD(): Unable to load GIF > reference image. in C:\MyGis\maplab\htdocs\mapbrowser\map.php on line 693 > > > how can I fix this ??? > The problem is simple. Probably the version of GD on your system does not support GIF output. Patent reason. To avoid this, please make sur you mapfile have the output type set to something like PNG. Also make sure your reference image is NOT a gif. I think that the tutorial have a gif reference map. > Would you please help me??? Thanks. > > PS: I found the section about xml installation settings confusing, not very > clear for an important setup that cause that much problems in the maplab! > Thanks you for your comments. We're trying really hard at DM Solutions to make Maplab easy to configure. But you may also know that web applications world sometime can be very hard to make it work due to all different systems that should be supported. That being said, if you have something in mind that can help, a sugestion, anything, please feel free to share it with us. Every comments are welcome. > > Kind regards, > > Oldes Çökdü > oldes@occons.com <mailto:oldes@occons.com> www.occons.com > <http://www.occons.com> > Mob: +(61) 417 139 382 (AU) +(90) 536 816 1407 (TR) > LEGAL DISCLAIMER: The information in this message is confidential and may be > legally privileged. It is intended solely for the addressee. Access to this > message by anyone else is unauthorised. If you are not the intended > recipient, any disclosure, copying, or distribution of the message, or any > action or omission taken by you in reliance on it, is prohibited and may be > unlawful. Please immediately contact the sender if you have receive this > message in error. Thank you. > > > > > -----Original Message----- > From: maplab-users-admin@dmsolutions.ca > [mailto:maplab-users-admin@dmsolutions.ca]On Behalf Of > maplab-users-request@dmsolutions.ca > Sent: Wednesday, 12 March 2003 4:00 AM > To: maplab-users@dmsolutions.ca > Subject: Maplab-users digest, Vol 1 #162 - 8 msgs > > > Send Maplab-users mailing list submissions to > maplab-users@dmsolutions.ca > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.dmsolutions.ca/mailman/listinfo/maplab-users > or, via email, send a message with subject or body 'help' to > maplab-users-request@dmsolutions.ca > > You can reach the person managing the list at > maplab-users-admin@dmsolutions.ca > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Maplab-users digest..." > > > Today's Topics: > > 1. Installation of MapLab 2.0rc4 - strange behaviour (Tweedy, Scott) > 2. Re: Strange behaviors (Sacha Fournier) > 3. Re: Installation of MapLab 2.0rc4 - strange behaviour (Sacha Fournier) > 4. RE: Installation of MapLab 2.0rc4 - strange behavi > our (Tweedy, Scott) > 5. Re: Installation of MapLab 2.0rc4 - strange behavi > our (Sacha Fournier) > 6. fwd: mapFactory components (Fred Warnock) > > --__--__-- > > Message: 1 > From: "Tweedy, Scott" <sctweedy@NRCan.gc.ca> > To: "MapLab Users (E-mail)" <maplab-users@dmsolutions.ca> > Date: Mon, 10 Mar 2003 15:26:01 -0500 > Subject: [maplab-users] Installation of MapLab 2.0rc4 - strange behaviour > > I installed MapLab 2.0rc4 and I started getting seeing some weird behaviour. > > I'm currently using Windows 2000, IIS 5.0, PHP 4.3.1, MapServer 3.6.4 (or > 3.7, I tried both). > > At first when I loaded MapLab I saw the following error message. > > Warning: mkdir(c:/winnt/temp/sess_3e6cece6ed637) [function.mkdir]: File > exists in D:\maplab\htdocs\common\session\session.php on line 141 > > The error message went away when I changed the session.auto_start value in > my PHP.ini file (which was set to 0 by default) to 1. > > Then when I loaded MapLab in IE6.0 and tried to open a file the file browser > opened in the wrong directory. It's opening within the MapLab file > structure in the maplab/htdocs/common/ folder instead of the directory that > I defined in the XML file. > > How can I get MapLab to start browsing the correct directory? > > Thanks in advance, > st > > --__--__-- > > Message: 2 > Date: Mon, 10 Mar 2003 16:12:43 -0500 > From: Sacha Fournier <sfournier@dmsolutions.ca> > Reply-To: sfournier@dmsolutions.ca > Organization: DM Solutions Group > To: galassoa@tin.it > CC: maplab-users@dmsolutions.ca > Subject: Re: [maplab-users] Strange behaviors > > Hi Alessandro, > > We're currently looking at this problem. Hopefully a fix will be > available soon. > > galassoa@tin.it wrote: > >>Hi everyone... >>i'm starting to work with MapLab 2.0rc4 on Windows2000. >>After installation of PHP4.3.1, mapserver 3.6.4 and maplab2.0rc4 i've > > noted > >>a strange behavior of MapEdit. >>I've opened an existing map and clicked on "Preview". Then the first view >>appears. But clicking again on zooming produce a blank image. >>Another thing is that in the legend don't appear the list of the available >>layer. >> >>May someone help me to understand where is the problem ? >> >>Thanks in advance, >>Alessandro. >> >> >>_______________________________________________ >>Maplab-users mailing list >>Maplab-users@dmsolutions.ca >>http://lists.dmsolutions.ca/mailman/listinfo/maplab-users >> > > > -- > Sacha Fournier > Applications Developer > DM Solutions Group > sfournier@dmsolutions.ca > tel: 418.696.5056 > fax: 418.696.5056 > > www.dmsolutions.ca > > > --__--__-- > > Message: 3 > Date: Mon, 10 Mar 2003 16:19:13 -0500 > From: Sacha Fournier <sfournier@dmsolutions.ca> > Reply-To: sfournier@dmsolutions.ca > Organization: DM Solutions Group > To: "Tweedy, Scott" <sctweedy@nrcan.gc.ca> > CC: "MapLab Users (E-mail)" <maplab-users@dmsolutions.ca> > Subject: Re: [maplab-users] Installation of MapLab 2.0rc4 - strange > behaviour > > Hi Tweedy, > > > Tweedy, Scott wrote: > >>I installed MapLab 2.0rc4 and I started getting seeing some weird > > behaviour. > >>I'm currently using Windows 2000, IIS 5.0, PHP 4.3.1, MapServer 3.6.4 (or >>3.7, I tried both). >> >>At first when I loaded MapLab I saw the following error message. >> >>Warning: mkdir(c:/winnt/temp/sess_3e6cece6ed637) [function.mkdir]: File >>exists in D:\maplab\htdocs\common\session\session.php on line 141 >> >>The error message went away when I changed the session.auto_start value in >>my PHP.ini file (which was set to 0 by default) to 1. > > > Investigating. > > >>Then when I loaded MapLab in IE6.0 and tried to open a file the file > > browser > >>opened in the wrong directory. It's opening within the MapLab file >>structure in the maplab/htdocs/common/ folder instead of the directory > > that > >>I defined in the XML file. >> >>How can I get MapLab to start browsing the correct directory? >> > > > This happen when the path specify in configuration file is not an > absolute path or a valid path. Can you double check those values please, > I'll take a look at the PHP code to make sure that everything is ok though. > > >>Thanks in advance, >>st >>_______________________________________________ >>Maplab-users mailing list >>Maplab-users@dmsolutions.ca >>http://lists.dmsolutions.ca/mailman/listinfo/maplab-users >> > > > -- > Sacha Fournier > Applications Developer > DM Solutions Group > sfournier@dmsolutions.ca > tel: 418.696.5056 > fax: 418.696.5056 > > www.dmsolutions.ca > > > --__--__-- > > Message: 4 > From: "Tweedy, Scott" <sctweedy@NRCan.gc.ca> > To: "'sfournier@dmsolutions.ca'" <sfournier@dmsolutions.ca> > Cc: "MapLab Users (E-mail)" <maplab-users@dmsolutions.ca> > Subject: RE: [maplab-users] Installation of MapLab 2.0rc4 - strange behavi > our > Date: Tue, 11 Mar 2003 08:34:34 -0500 > > Yeah, my file_browswer_root value is an absolute path to an existing > directory. I've checked the spelling of the folder name and it's correct. > I've also tried using the folder name with and without a trailing slash. > Each time I get the same result, the file browsing starts in the /common/ > folder. > > I'm using IE 6.0.26 when this behaviour is seen. > > Thanks again, > st > > -----Original Message----- > From: Sacha Fournier [mailto:sfournier@dmsolutions.ca] > Sent: Monday, March 10, 2003 4:19 PM > To: Tweedy, Scott > Cc: MapLab Users (E-mail) > Subject: Re: [maplab-users] Installation of MapLab 2.0rc4 - strange > behaviour > > > Hi Tweedy, > > > Tweedy, Scott wrote: > >>I installed MapLab 2.0rc4 and I started getting seeing some weird > > behaviour. > >>I'm currently using Windows 2000, IIS 5.0, PHP 4.3.1, MapServer 3.6.4 (or >>3.7, I tried both). >> >>At first when I loaded MapLab I saw the following error message. >> >>Warning: mkdir(c:/winnt/temp/sess_3e6cece6ed637) [function.mkdir]: File >>exists in D:\maplab\htdocs\common\session\session.php on line 141 >> >>The error message went away when I changed the session.auto_start value in >>my PHP.ini file (which was set to 0 by default) to 1. > > > Investigating. > > >>Then when I loaded MapLab in IE6.0 and tried to open a file the file > > browser > >>opened in the wrong directory. It's opening within the MapLab file >>structure in the maplab/htdocs/common/ folder instead of the directory > > that > >>I defined in the XML file. >> >>How can I get MapLab to start browsing the correct directory? >> > > > This happen when the path specify in configuration file is not an > absolute path or a valid path. Can you double check those values please, > I'll take a look at the PHP code to make sure that everything is ok though. > > >>Thanks in advance, >>st >>_______________________________________________ >>Maplab-users mailing list >>Maplab-users@dmsolutions.ca >>http://lists.dmsolutions.ca/mailman/listinfo/maplab-users >> > > > -- > Sacha Fournier > Applications Developer > DM Solutions Group > sfournier@dmsolutions.ca > tel: 418.696.5056 > fax: 418.696.5056 > > www.dmsolutions.ca > > --__--__-- > > Message: 5 > Date: Tue, 11 Mar 2003 11:36:42 -0500 > From: Sacha Fournier <sfournier@dmsolutions.ca> > Reply-To: sfournier@dmsolutions.ca > Organization: DM Solutions Group > To: "Tweedy, Scott" <sctweedy@NRCan.gc.ca> > CC: "MapLab Users (E-mail)" <maplab-users@dmsolutions.ca> > Subject: Re: [maplab-users] Installation of MapLab 2.0rc4 - strange behavi > our > > Hi Scott, > > I've take a look at the code and tried to reproduce the problem without > success. I'm still investigating. In the mean time can you try to use an > other version of PHP (4.2 or 4.3.2dev). I know that there was some bugs > with PHP4.3.1 as a CGI that was fixed in current dev version. > > Regards, > > > Tweedy, Scott wrote: > >>Yeah, my file_browswer_root value is an absolute path to an existing >>directory. I've checked the spelling of the folder name and it's correct. >>I've also tried using the folder name with and without a trailing slash. >>Each time I get the same result, the file browsing starts in the /common/ >>folder. >> >>I'm using IE 6.0.26 when this behaviour is seen. >> >>Thanks again, >>st >> >>-----Original Message----- >>From: Sacha Fournier [mailto:sfournier@dmsolutions.ca] >>Sent: Monday, March 10, 2003 4:19 PM >>To: Tweedy, Scott >>Cc: MapLab Users (E-mail) >>Subject: Re: [maplab-users] Installation of MapLab 2.0rc4 - strange >>behaviour >> >> >>Hi Tweedy, >> >> >>Tweedy, Scott wrote: >> >> >>>I installed MapLab 2.0rc4 and I started getting seeing some weird >> >>behaviour. >> >> >>>I'm currently using Windows 2000, IIS 5.0, PHP 4.3.1, MapServer 3.6.4 (or >>>3.7, I tried both). >>> >>>At first when I loaded MapLab I saw the following error message. >>> >>>Warning: mkdir(c:/winnt/temp/sess_3e6cece6ed637) [function.mkdir]: File >>>exists in D:\maplab\htdocs\common\session\session.php on line 141 >>> >>>The error message went away when I changed the session.auto_start value in >>>my PHP.ini file (which was set to 0 by default) to 1. >> >> >>Investigating. >> >> >> >>>Then when I loaded MapLab in IE6.0 and tried to open a file the file >> >>browser >> >> >>>opened in the wrong directory. It's opening within the MapLab file >>>structure in the maplab/htdocs/common/ folder instead of the directory >> >>that >> >> >>>I defined in the XML file. >>> >>>How can I get MapLab to start browsing the correct directory? >>> >> >> >>This happen when the path specify in configuration file is not an >>absolute path or a valid path. Can you double check those values please, >>I'll take a look at the PHP code to make sure that everything is ok > > though. > >> >>>Thanks in advance, >>>st >>>_______________________________________________ >>>Maplab-users mailing list >>>Maplab-users@dmsolutions.ca >>>http://lists.dmsolutions.ca/mailman/listinfo/maplab-users >>> >> >> > > -- > Sacha Fournier > Applications Developer > DM Solutions Group > sfournier@dmsolutions.ca > tel: 418.696.5056 > fax: 418.696.5056 > > www.dmsolutions.ca > > > --__--__-- > > Message: 6 > Date: Tue, 11 Mar 2003 11:43:15 -0500 > From: Fred Warnock <warnock@dmsolutions.ca> > Organization: DM Solutions Group Inc. > To: Maplab-users <Maplab-users@dmsolutions.ca> > Subject: [maplab-users] fwd: mapFactory components > > forwarding Chris's query to you all... > > > "I'm not sure whether this is better addressed to you or the group but > here goes." > > "Is there a way of separating the components of a Maplab app. I'm > looking to put the keymap, scalebar and mainmap into different cells of > an html table. So far I'v managed to jam the whole Mapfactory app into > one html table cell." > > "Mapfactory creates a single .php include that contains the guts of the > app. Hopefully, you know of a way of doing this without mangling the > hell out of the .php file." > > "Does this make any sense or should I elaborate?" > > "Cheers, > Chris" > > > > > --__--__-- > > _______________________________________________ > Maplab-users mailing list > Maplab-users@dmsolutions.ca > http://lists.dmsolutions.ca/mailman/listinfo/maplab-users > > > End of Maplab-users Digest > > _______________________________________________ > Maplab-users mailing list > Maplab-users@dmsolutions.ca > http://lists.dmsolutions.ca/mailman/listinfo/maplab-users > -- Sacha Fournier Applications Developer DM Solutions Group sfournier@dmsolutions.ca tel: 418.696.5056 fax: 418.696.5056 www.dmsolutions.ca
This archive was generated by Pipermail. |
MapTools.org -- Hosted by DM Solutions Group |
